This toilet has a 10 1/2 inch rough in, which is the distance from the wall behind the toilet to the centerline of the drain. This is a standard size for many toilets, so you should have no trouble finding a replacement that will fit.
Ten and a half inches is standard for most toilets, although some may be a bit smaller or larger.
Table of Contents
Can you put a 10-inch rough in toilet?
This is due to the fact that a 12” rough-in toilet will have a bowl that is too large to fit in a 10” rough-in size bathroom. In addition, the 12” rough-in toilet will also have a larger tank that will not be able to fit in the smaller 10” rough-in size bathroom.
A 12-inch rough-in is the standard size for most toilets. If your measurements are between 115 and 125 inches, then your toilet falls within that range and is therefore a 12-inch rough-in. The standard size for a toilet is 24 inches from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 15 inches of clearance on each side as a guideline.
Does Kohler make a toilet with a 10-inch rough in
This is a toilet with a 10″ rough-in that is designed for comfortable use. It has a chair height bowl that makes it easy to use, and the elongated design provides additional comfort.
When measuring for a toilet’s rough in, you will need to measure the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases. Keep in mind that your toilet may need a different rough in dimension depending on the type of toilet you have.
Can you replace a 10 inch rough-in toilet with a 12 inch?
If you have a 10-inch rough-in for your bathroom plumbing, you can still install a toilet designed for a 12-inch rough-in. This is because the toilet’s rough-in should ideally match the rough-in for your bathroom plumbing. However, you may need to make some adjustments to the toilet to get it to fit properly into the space.
If you’re planning on replacing your toilet, it’s important to make sure the new one will fit in the space you have. The rough-in size is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. Measuring this before you remove the old toilet will help you make sure the new one will fit.
What is a comfort height toilet?
There is no definitive answer as to what qualifies as a “comfort height” toilet, but generally speaking, they tend to be taller than traditional toilets. This can be helpful for people who have difficulty bending down or sitting on low surfaces. Comfort height toilets can vary in height, but typically the seat is between 17 and 19 inches from the ground (43cm to 48cm). In contrast, a standard traditional height toilet typically stands at around 15 inches (38cm).
The minimum clearance from the center of the toilet to any adjacent fixture or sidewall is 15 inches. This means that when you are looking at the toilet, you should have at least 15 inches of clearance from the center of the toilet to any adjacent fixture (or wall).
How many inches should you leave for a toilet
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. The NKBA actually recommends 32 inches.
When choosing a toilet, it is important to consider the height of the seat. Standard toilets typically measure 15 or 16 inches from the floor to the top of the seat, but comfort toilets heights are 17 to 19 inches. The Americans with Disabilities Act (ADA) specifies that the height of a disabled toilet must be within this range. This is to ensure that individuals with disabilities can comfortably use the toilet.
What toilet takes up the least amount of space?
There are a variety of space saving toilets on the market that can make a big difference in a small bathroom. Here are 10 of the best options available:
1. Saniflo 023 Sanicompact – This toilet is designed for small spaces, such as RVs and boats. It features a built-in macerator that grinds up waste, making it easy to empty.
2. HORROW HWMT8733 Small Space-Saving Toilet – This toilet is designed for small bathrooms and features a compact design. It has a dual-flush system that helps save water.
3. Kohler San Souci Comfort Height Compact Elongated Toilet – This toilet is designed for small bathrooms and features a comfortable height for taller users. It has a dual-flush system that helps save water.
4. American Standard Concealed Trapway Cadet 3 Right Height Toilet – This toilet is designed for small bathrooms and features a concealed trapway. This helps to reduce clogging and makes the toilet easier to clean.
5. Galba Small Space-Saving Toilet – This toilet is designed for small spaces, such as RVs and boats. It has a compact design and is easy to
There are two types of elongated toilets- those that fit a 10” rough-in, and those that fit a 14” rough-in. If you have a 10” rough-in, you will need to purchase a toilet that specifically states that it fits a 10” rough-in. Likewise, if you have a 14” rough-in, you will need to purchase a toilet that fits a 14” rough-in.
How do you know if your toilet is tight enough
If you’re trying to remove a toilet bowl, a good rule of thumb is to turn it a couple times to see if there’s any resistance. If there is, try wiggling the toilet bowl slightly. If there’s no significant movement, you’re probably tight enough. This tightening operation is a “feel” thing that you get from experience, so use your best judgement.
The roughing measurement is the measurement from your bolt caps. This is the measurement that you will use to determine the size of the hole that you need to drill.
Why would I want an elongated toilet bowl?
Elongated bowls are considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
The waste water pipe under the toilet is usually vertical and uses gravity to move wastewater away. For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.
Warp Up
A toilet with a 10 1/2 inch rough in is a toilet with a 10 1/2 inch space between the wall and the bolts that hold the toilet to the floor.
10 1/2 inch rough in toilets are not as common as other sizes, but they can be found. They may be a bit more difficult to install, but they can be worth the extra effort. With a 10 1/2 inch rough in, you’ll have a toilet that flushes more efficiently and effectively.