Skip to content

10 inch rough in round toilet?

This round toilet is a great option for anyone looking for a 10 inch rough in model. It is a reliable and durable option that will provide years of trouble-free use. This model is also easy to clean and maintain, making it a great choice for any home.

A 10 inch rough in toilet is a toilet that has a 10 inch rough in. This is the distance from the back of the toilet to the center of the drain.

Can I use a 10-inch rough in toilet?

If you have a 10” rough-in size in your bathroom, you will need to use a 10” rough-in toilet. A 12” rough-in toilet will not fit in a bathroom with a 10” rough-in size.

If you’re planning on replacing your old toilet, it’s important to know the rough-in size. This will determine what size of toilet you can buy. To measure the rough-in size, simply measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 115 and 125 inches, it is a 12-inch rough-in.

See also  Shower pan reviews?

What’s the difference between a 10-inch rough in a 12-inch rough in toilet

Those numbers refer to the distance between the wall and the center of the closet flange. Most toilet bowls will work with either a 10″ or a 12″ distance, but a 10″ rough tank is slimmer to allow for the decreased distance.

The rough in dimensions for a toilet refer to the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases. This measurement is important to take into consideration when planning the installation of a new toilet, as it will determine the placement of the unit and the distance of the waste pipe from the wall.

Can you replace a 10 inch rough-in toilet with a 12 inch?

If you have a 10-inch rough-in for your bathroom plumbing, you can still install a toilet designed for a 12-inch rough-in. This is because the rough-in for a toilet is the distance from the wall to the center of the drain pipe.

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture.

Is toilet rough in from finished wall?

When setting the center of the water closet flange, be sure to measure from the finished wall and not from the base molding. This will ensure that the flange is installed in the correct location.

See also  Where to hang wet towels after shower?

If you’re looking for an excellent performing toilet, remember to check the score. Toilets with a score of 500 and above are sure to provide excellent performance. So, keep this in mind when searching for your next toilet.

Are all toilet drains the same distance from the wall

The rough-in distance refers to the distance from the wall to the center of the toilet drain. In newer homes, this distance is typically 12 inches, while in older homes it can be anything between 10 and 14 inches. A wall-mounted toilet also needs a 10 inch thick wall to accommodate the flushing system.

As a rule of thumb, try tightening the bolts a turn or two at a time until you feel resistance. Then, try to wiggle the toilet bowl slightly. If there is no significant movement, you are probably tight enough. This tightening operation is a “feel” thing that you get from experience, so be conservative and use your best judgement.

Can you move a toilet back a few inches?

If you’re planning on moving your toilet, you’ll need to account for the waste water line. An offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.

If you’re planning on replacing your old toilet, make sure to measure the rough-in size first. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. Knowing this measurement will help you make sure that the new toilet you purchase will fit in your space.

See also  Mapei flex grout?

Why would I want an elongated toilet bowl

Elongated bowls are generally considered more ‘hygienic’ than smaller bowls due to their larger surface area. This makes them easier to use with less mess, especially for men and children. In addition, the longer bowl size is a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

The toilet flange must be at least 15 inches away from any sidewall or nearby fixture. However, 15 inches is the absolute minimum. A 15-inch distance from the vanity, shower, tub and back and side walls are required to accommodate the toilet flange.

What’s the minimum distance from toilet to sink?

The location of a toilet should allow for some elbow room between it and another fixture or vanity. The National Kitchen and Bath Association (NKBA) recommends a minimum distance of 18 inches, while codes typically allow for a minimum distance of 15 inches.

When installing a toilet flange, it is best practice to install the flange on top of the finished floor. This will help to prevent the formation of leak paths, as the flange will be at the correct height to accept the horn at the bottom of the toilet.


A standard 10 inch rough in for a round toilet is 12 inches from the center of the flange to the finished wall.

A 10 inch rough in round toilet is a great option for any bathroom. It is small enough to fit in any space, yet still provides a powerful flushing action. This toilet is a great choice for any home.