Skip to content

10 vs 12 rough in toilet?

A rough-in toilet is a toilet that has not been installed into a bathroom yet. The rough-in is the distance from the back wall to the center of the drain pipe. A standard rough-in is 10 inches, but some toilets need a 12-inch rough-in.

There is no definitive answer to this question as it depends on the specific circumstances of each individual situation. Some people may prefer a 10-inch rough in for their toilet while others may prefer a 12-inch rough in. Ultimately, it is up to the individual to decide what size rough in they want for their toilet.

Can you put a 12-inch rough in toilet with a 10-inch?

This is because the 12” rough-in size is too large for the 10” rough-in size. A 10” rough-in toilet can fit into a 12” rough-in (though a longer connector may be needed), but a 12” rough-in toilet will not fit in a bathroom with a 10” rough-in size.

Different Rough-in Measurements

A 10-inch rough-in is the usual measurement installed in older homes However, the 12-inch measurement is the standard for modern toilet plumbing Most toilets that you encounter in retail outlets have 12-inch rough-in dimensions.

What does 12 rough in mean for a toilet

Toilet rough in dimensions are the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.

Most toilet bowls will work with either a 10″ or a 12″ distance from the wall to the center of the closet flange. A 10″ rough tank is slimmer to allow for the decreased distance.

See also  Over toilet cabinet espresso?

What is the most common toilet rough-in size?

The standard rough-in for toilets is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should be able to find the rough-in measurement in the product information for the new toilet you are considering. Keep in mind that you may need to make adjustments to the placement of the new toilet if the rough-in is different from what you are used to.

There are many benefits to using a comfort height toilet. The taller seat makes it much easier to sit down and stand up, and the higher seat alleviates discomfort that comes from squatting down and cocking the knees out to the sides. This is especially beneficial for taller people, seniors and anyone with knee or back pain.

What height toilet is best for seniors?

Comfort toilets are becoming more popular in homes and businesses due to the Americans with Disabilities Act (ADA) specifying that the height of a disabled toilet must be within the range of 17 to 19 inches. This is a few inches taller than a standard toilet, which typically measures 15 or 16 inches from the floor to the top of the seat. This taller height is more comfortable for many people and makes it easier to use the toilet without having to stoop down.

Comfort height toilets are taller than standard toilets, making them more comfortable for taller people to use. They are also preferred by the elderly and those with physical disabilities, as the extra height makes it easier to get on and off the toilet.

What is a comfort height toilet

Comfort height is the height that meets ADA standards. It is more comfortable for taller people and for people who have a hard time getting up from a low seat, like the elderly or disabled. It will measure 17 to 19 inches from the floor to the seat.

Clearance from the center of the toilet to any adjacent fixture or sidewall is critical in order to ensure proper and efficient operation of the toilet. A minimum of 15 inches is required, but more is always better. This will help to avoid any potential clogs or other issues that could occur.

See also  Hand towel ring height?

What is a good map score for a toilet?

It is important to remember that toilets with a score of 500 and above will provide excellent performance. This is important to keep in mind when choosing a toilet for your home.

Most toilets have a standard rough-in of 12 inches. This means that the distance from the back wall to the center of the drain is 12 inches. If your toilet has a different rough-in, you’ll need to make sure to get a replacement that has the same rough-in. You can measure the rough-in by putting a measuring tape at the back of the toilet, and extending the tape forward to the center of the drain.

Are all toilet drains the same distance from the wall

Toilet flanges must be at least 15″ away from any sidewall or nearby fixture. However, 15″ is the absolute minimum. A 15-inch distance from the vanity, shower, tub and back and side walls are required to accommodate the toilet flange.

Toilet flanges should be installed at least 15-1/2 inches from the center of the flange to the wall framing. The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. This will ensure that the toilet is properly supported and won’t rock when in use.

Should toilet flange be flush with floor?

If you are installing a new toilet, it is best to install the toilet flange on top of the finished floor. This will help to prevent any leak paths from forming, as the flange will be at the correct height to accept the horn at the bottom of the toilet.

The size of your toilet’s flapper is determined by the size of the flush valve drain opening at the bottom of your tank. Most toilets will use the two inch flapper; however, three inch flappers have become popular in recent years and can be found in newer toilets manufactured since 2005.

See also  Toilet that won't clog?

Do low-flow toilets clog more easily

The major drawback of low-flow toilets is the lack of power to flush solids out of your house and into the sewer main. The low water volume in a low-flush toilet can make it difficult to achieve sufficient outflow, which can leading to problems like clogging and unpleasant odors.

There is some evidence to support the claim that squatting can help with complete evacuation of the colon. One study found that people who squatted had less fecal residue left in their rectums after a bowel movement than those who sat on a conventional toilet. However, more research is needed to confirm these findings. If you’re interested in trying squatting, there are special toilets designed for this purpose.

Should you lean forward on the toilet

The puborectalis muscle is a band of muscle that helps to keep the rectum in place. When this muscle relaxes, it allows the rectum to move into a more natural position and makes it easier to go to the toilet. When you lean forward into a 35 degree angle, it helps to relax this muscle and makes it easier to go to the toilet.

The newest and most popular comfort height for toilets is typically around 16 1/8” from the floor to the rim of the bowl. This is higher than the standard ADA (Americans with Disabilities Act) height of 17”-19” from the floor to the bowl rim, including the seat. This taller height is more comfortable for many people and makes it easier to stand up from a seated position.

Final Words

There is no definitive answer to this question since it depends on the specific dimensions of the bathroom and the positioning of the toilet within it. However, generally speaking, a 10-inch rough-in tends to be suitable for smaller bathrooms while a 12-inch rough-in is better suited for larger bathrooms. Ultimately, it is best to consult with a professional contractor or plumber to determine which size rough-in is best for your particular bathroom.

There is no clear answer as to which is better, a 10 or 12 inch rough in for a toilet. It really depends on the specific situation and what will work best in that particular space. In general, a 10 inch rough in may be slightly easier to install, but a 12 inch rough in may provide a more sturdy and secure connection.