A toilet’s rough-in is the distance from the center of the drain hole to the wall behind the toilet. Most toilets have a rough-in of 12 inches, but some have a 10- or 14-inch rough-in. An 11-inch rough-in is less common, but it is possible to find toilets with this size rough-in. If you have an 11-inch rough-in, you may need to special order a toilet.
A rough-in for an 11 inch toilet would mean that the distance from the center of the drain to the back wall would be 11 inches. This is the standard size for most toilets, but please check your particular model to be sure.
Table of Contents
Is there 11 rough-in toilets?
There are three standard toilet rough-in sizes: 10 inches, 12 inches, and 14 inches. The most common size is 12 inches, but you should measure your rough-in before assuming that this is the size you have. Some older homes come with 10” or 14” rough-in sizes.
If you have a 12-inch rough-in for your bathroom plumbing, you can still install a toilet designed for a 10-inch rough-in. This is because the rough-in for a toilet is the distance from the wall to the center of the drain hole. As long as the center of the drain hole is 10 inches from the wall, the toilet will fit.
How do I know if I need 10 inch or 12 inch rough-in toilet
If you’re looking to install a new toilet, you’ll first need to measure the rough-in. The rough-in is the distance from the center of the capped bolts on the bottom of the toilet to the wall. As a guideline, there should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side. If your measurements are between 115 and 125 inches, it is a 12-inch rough-in.
Most toilets will have a 12 inch rough-in. Toilets with a 10- or 14-inch rough-in measurement are a little less common, so you might have less of a selection of toilets of this size.
How much clearance do you need on each side of a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture (The NKBA actually recommends 32 inches). There should be at least 24 inches of clear space in front of a toilet or bidet.
This is an important measurement to keep in mind when choosing a toilet, as you need to make sure there is enough space around it. 15 inches is the minimum clearance you should have, but you can always have more. So when looking at a toilet, make sure there is at least 15 inches of clearance from the center of the toilet to any adjacent fixture (or wall). This will ensure that you have enough space to use the toilet comfortably.
How far can you run a toilet waste pipe horizontally?
As you have realised yourself, a good fall on the branch pipe is essential 25º, or 44mm fall for every metre run, is the usual standard. Nevertheless, six metres is the maximum run according to Building Regulations.
There are elongated toilets built to fit a 10” rough-in, and some are built to fit 14”. The size of the toilet will determine how much space is available for the user. If you have a smaller bathroom, you may want to consider a toilet with a smaller footprint.
Can you put PVC toilet flange on cast iron pipe
If you are connecting a toilet flange to a DWV pipe, you will need to choose a flange that is compatible with the material of the pipe. For example, if the pipe is made of PVC, you will need to use a PVC closet flange. If the pipe is made of cast iron, you will need to use a cast iron toilet flange.
Comfort height is the height that meets ADA standards. It is more comfortable for taller people and for people who have a hard time getting up from a low seat, like the elderly or disabled. It will measure 17 to 19 inches from the floor to the seat.
How do I know if my toilet is 2 or 3 inches?
The flush valve drain opening is located at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
If you install the toilet flange on top of the finished floor, you can be sure that there won’t be any leak paths, because the flange will be at the correct height to accept the horn at the bottom of the toilet. This is the best practice.
Is shorter or taller toilet better
There are pros and cons to both taller and shorter toilets. Ultimately, it depends on the individual’s needs and preferences. Taller toilets may be more comfortable for taller adults or older adults who have difficulty bending down. Shorter toilets may be more comfortable for children or petite adults who have difficulty reaching up. Standard height toilets are typically between 145 and 16 inches from the ground, while comfort height toilets are between 17 and 19 inches from the ground.
One of the best places to hang artwork in a bathroom is above the toilet. Toilets sit lower on the wall so unless there is a window above, you typically have an abundance of wall space. A long piece of art should be hung so that the bottom is at least 6″-8″ above the lid of the tank.
What’s the difference between a 10 inch rough in a 12 inch rough in toilet?
Those numbers represent the distance between the wall and the center of the closet flange (the connection point for the bolts that hold the toilet bowl in place). Most toilet bowls will work with either a 10″ or a 12″ distance, but a 10″ rough tank is slimmer to allow for the decreased distance.
Bathroom building code typically includes a provision for toilets requiring at least 21 inches of clearance in front of the toilet. However, while this is not required, opting for 30 inches of room provides a more comfortable space. Side-to-side clearance: a minimum of 15 inches from the center-line of the toilet to the nearest obstruction is also recommended for optimal comfort.
What is code for distance from toilet to vanity
It’s important to have some elbow room between a toilet and another fixture or vanity, according to the NKBA. Their recommendation is at least 18″, but codes allow a minimum distance of 15″. This extra space is important for both comfort and accessibility.
You will need a water closet with a 10-inch rough-in and 15 inches of clearance.
How far can a toilet be from the main drain
The 4 meter distance is the maximum distance the toilet should be from the main drain in order to maintain an effective draining system that avoids bad smells and the need to regularly empty siphons. This distance allows for a 2% minimum slope, which is necessary for proper drainage.
If you need to have a 90-degree fitting under a slab, it needs to be either at the base of a stack or under a toilet that sits on a slab. This is because the fitting needs to be able to support the weight of the slab.
Final Words
A rough-in is the distance from the wall behind the toilet to the center of the drainpipe. Most toilets have a standard rough-in of 12 inches. However, some toilets are available with a 10-inch or 14-inch rough-in.
There are many things to consider when choosing a toilet rough in size. The most important factor is the size of the bathroom. A smaller bathroom may not be able to accommodate a larger toilet rough in size. Another factor to consider is the type of toilet you plan on installing. Some toilets require a larger rough in size than others. Ultimately, it is important to choose a size that will work for your specific bathroom and toilet.