There are many different rough in sizes for toilets, but the most common size is 12 inches. This size is used in most homes and businesses. There are other sizes, but they are less common.
12″ is a standard size for toilet rough-in dimensions.
Table of Contents
How do I know if I need a 10 inch or 12-inch rough in toilet?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard) There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 115 and 125 inches, it is a 12-inch rough-in.
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space. This is because the rough-in is the distance from the wall to the center of the drain, and the bowl of the toilet is only about 9 inches wide. So, even though a 12-inch rough-in toilet won’t fit into a 10-inch rough-in space, a 10-inch rough-in toilet will fit into a 12-inch rough-in space.
What is the difference between a 10 inch and a 12-inch toilet
The numbers mentioned in the topic refer to the distance between the wall and the center of the closet flange. Toilet bowls usually work with either a 10″ or 12″ distance. A 10″ rough tank is slimmer to allow for the decreased distance.
The standard rough-in size for a toilet is 12 inches in contemporary houses and 10 inches in older homes. This is the toilet rough-in dimension: Supply line (vertical): 8 1/4 inches of height to accommodate most base moldings. Supply line (horizontal): 6 inches maximum to either side of the toilet centerline.
Are most toilets 12 rough in?
Most toilets have a 12 inch rough-in, but toilets with a 10- or 14-inch rough-in measurement are less common. If you’re replacing an existing toilet, look for a replacement toilet with the same rough-in measurement. This will ensure that your new toilet will fit in the space provided.
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture (The NKBA actually recommends 32 inches) There should be at least 24 inches of clear space in front of a toilet or bidet.
How far should rough plumbing for toilet be from wall?
The toilet flange must be at least 15 inches away from any sidewall or nearby fixture. However, 15 inches is the absolute minimum. A 15-inch distance from the vanity, shower, tub and back and side walls are required to accommodate the toilet flange.
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. The minimum distance in front of the toilet to the facing wall or fixture is 21 inches.
Why would I want an elongated toilet bowl
Elongated bowls are usually seen as more ‘hygienic’ due to the larger surface area of the bowl. This makes it easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
A comfort toilet is a toilet that is taller than a standard toilet and ranges from 17 to 19 inches in height. This type of toilet is often used by people with disabilities, as the taller height makes it easier for them to use. The Americans with Disabilities Act (ADA) requires that all toilets in public places be wheelchair accessible, which means they must be the correct height for people in wheelchairs.
Is a 1 piece or 2 piece toilet better?
The one-piece toilet is a great option for small bathrooms because it takes up less space than a two-piece toilet. It is also more durable because it is made of one solid piece of ceramic. There are fewer exposed plumbing or flushing elements, so it is less likely to break down.
There are a few things to consider when choosing a toilet height. Standard-height rims are 14- to 15-inches from the floor and should work well for shorter people. If you’re taller, consider chair height toilets that have a toilet seat height of 17-inches or more. Keep in mind that you can always add a stool or step to a standard-height toilet to make it taller.
Does toilet rough in size matter
When measuring the rough-in size for a new toilet, it is important to first measure the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. This will ensure that the new toilet will fit in the space. It is also best to remove the old toilet before taking this measurement.
The size of your toilet’s flapper is important in order to ensure a proper flush. Most toilets will use a two inch flapper, but three inch flappers have become more popular in recent years and can be found in newer toilets manufactured since 2005. You can easily determine your toilet’s flapper size by looking at the flush valve drain opening at the bottom of your tank.
How far from the wall should a toilet flange be?
When measuring the distance from the center of the water closet flange to the back wall, make sure to measure from the finished wall and not the base molding. Another thing to consider is the thickness of your back wall. If you used ½” drywall, add an extra ½”.
While it is important to have a bowel movement, you should not spend more time on the toilet than is necessary. The average bowel movement takes 12 seconds, but sometimes it can take longer. If you find that you are spending more than 10 minutes on the toilet, you should consult a medical professional.
Final Words
There is no one-size-fits-all answer to this question, as the ideal dimensions for a 12″ rough in toilet will vary depending on the specific dimensions of the bathroom in which it will be installed. However, some general guidelines for choosing a 12″ rough in toilet include ensuring that there is at least 18″ of clearance from the center of the toilet to the nearest wall, and that the toilet is positioned so that the flushing handle is within easy reach.
The average rough in dimensions for a toilet are 12 inches from the back wall to the center of the flange. This measurement is taken from the wall to the center of the flange, not from the edge of the flange. The reason for this is that the flange is not always level with the floor, so you need to be sure to measure from the center of the flange to get an accurate measurement.