A 9-inch rough in toilet is a toilet that has a 9-inch hole in the floor for the drain. This type of toilet is usually used in small bathrooms or in homes with limited space.
There is no definitive answer to this question as the rough in for toilets can vary depending on the installation. However, a 9 inch rough in is generally considered to be the standard size for most toilets.
Table of Contents
Can you replace a 10-inch rough in toilet with a 12-inch?
If you have a 10” rough-in size in your bathroom, you will need to find a toilet that is made for that size. You cannot use a 12” rough-in toilet in a bathroom with a 10” rough-in size.
If you’re looking to install a new toilet, you’ll first need to measure the rough-in. The rough-in is the distance from the center of the drainpipe to the wall. Most toilets have a 12-inch rough-in, but some may have a 10- or 14-inch rough-in. Toilet rough-ins are usually between 115 and 125 inches.
What are the three common rough in sizes for toilets
The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.
Thank you for choosing our 8 inch rough in toilet. We are confident that you will be satisfied with its performance. This toilet is designed for a comfortable and efficient experience.
How many inches should a toilet be away from the wall?
When designing a bathroom, it is important to consider the placement of the toilet. Most codes require at least 15 inches of space from any side wall or obstruction, and a minimum of 30 inches of space between the center of the toilet and any other sanitary fixture. The NKBA actually recommends 32 inches of space. There should also be at least 24 inches of clear space in front of the toilet or bidet.
Elongated bowls are helpful for a number of reasons. They are considered more hygienic because the larger surface area of the bowl makes it easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
Does a 10 in rough-in toilet save space?
A toilet with a 12-inch rough-in will not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
When replacing a toilet, it is important to look for a replacement toilet with the same rough-in measurement. Most toilets will have a 12 inch rough-in, but toilets with a 10- or 14-inch rough-in measurement are a little less common. If you’re replacing an existing toilet, look for a replacement toilet with the same rough-in.
What is the rough-in for an elongated toilet
There are elongated toilets built to fit a 10” rough-in, and some are built to fit 14”. If you have a 10” rough-in, you will need to buy an elongated toilet that is built to fit a 10” rough-in. If you have a 14” rough-in, you will need to buy an elongated toilet that is built to fit a 14” rough-in.
When measuring the rough-in distance for a toilet, it is important to take into account the baseboard and not to measure from it. An accurate measurement is necessary in order to purchase the correct fixture for your bathroom.
Are most toilets 2 or 3 inch?
If your toilet’s flush valve drain opening is two inches, then you need a two inch flapper. If it’s three inches, then you need a three inch flapper.
There are a few reasons for this rule:
1) to prevent overloading of the drain ( SANitary TEE )
2) to prevent cross-connection between fixtures
3) to keep noise levels down
4) and to provide adequate ventilation
How far can you move a toilet with an offset flange
The toilet offset flange is a great way to give yourself some extra space around your toilet sewage pipe. It works with both 3-inch and 4-inch pipes, and it can give you up to 2 inches of extra distance in any direction. This is a great product to use if you’re looking to make some extra space in your bathroom.
The proper slope for any drain line is ¼ inch per foot of pipe. This means that for every foot the pipe travels horizontally, it should be dropping ¼ inch vertically. This ensures that water will flow properly through the pipe and not cause any clogs or blockages.
Are all toilets the same distance from the wall?
This is important because if the flange is too close to another fixture, it may not be able to function properly and could cause leaks. Additionally, it is important to have this minimum distance so that there is adequate space to clean around the flange.
If you install the toilet flange flush with the finished floor, or even below the finished floor, leak paths will form, because the flange won’t be at the correct height to accept the horn at the bottom of the toilet. A best practice is to install the toilet flange on top of the finished floor. This will ensure that the flange is at the correct height and will create a tight seal with the bottom of the toilet.
Should a toilet be flush with the wall
The toilet flange must be at least 15″ away from any sidewall or nearby fixture. However, 15″ is the absolute minimum. A 15-inch distance from the vanity, shower, tub and back and side walls are required to accommodate the toilet flange.
Toilet placement is important for a number of reasons. First, you need to have enough space around the toilet so that you can comfortably use it. This means having enough space to sit down and stand up without hitting anything. Second, placement can affect the function of the toilet. For example, if the toilet is too close to the wall, you may not be able to properly flush it. Finally, codes typically require a certain amount of space between the toilet and other fixtures, such as vanities. The NKBA (National Kitchen and Bath Association) recommends a minimum of 18 inches, while codes typically allow for a minimum of 15 inches.
What is the most comfortable toilet shape
There are pros and cons to both the elongated and round toilet, so it really comes down to personal preference. The elongated toilet is very common and usually considered more comfortable, while the round toilet is smaller and generally more appropriate for bathrooms dedicated to children or for very tight spaces. Ultimately, it is up to the individual to decide which type of toilet is best for them.
If you’re looking for a toilet that is easier to get on and off of, a tall toilet is a good option. These toilets are also a good choice for taller people who find standard toilets too low.
Warp Up
There is no definitive answer to this question as the rough in for toilets can vary depending on the specific installation. However, a good rule of thumb is to allow for a minimum of 9 inches of space from the wall to the center of the toilet flange. This will ensure that there is sufficient room for the toilet to be installed properly.
Most homes are built with a standard 10 or 12-inch rough-in for toilets, but if you’re planning a new bathroom or remodeling an existing one, you may be able to save some space by using a 9-inch rough-in instead. This can be a particularly good option if you’re tight on space or want to create a more compact bathroom. Keep in mind, though, that you may have more limited choices when it comes to 9-inch rough-in toilets, so be sure to do your research before making your final decision.