Skip to content

9 inch rough toilet?

There’s no need to be ashamed of having a 9 inch rough toilet. In fact, it’s something to be proud of! This sturdy toilet can take whatever you throw at it and keep on going. If you’re looking for a toilet that can handle everything you’ve got, then the 9 inch rough toilet is the one for you.

A 9-inch rough toilet is a toilet with a roughness of 9 inches.

Can I use a 10-inch rough in toilet?

This is because the 10” rough-in size is too small to accommodate a 12” rough-in toilet. A 12” rough-in toilet requires a minimum of 12” of space in order to be installed properly. If you attempt to install a 12” rough-in toilet in a 10” rough-in bathroom, you will likely encounter a number of problems, including:

-The toilet will not flush properly
-The toilet will not fill properly
-The toilet will not seat properly
-The toilet will be unstable and could tip over

In short, it is not advisable to attempt to install a 12” rough-in toilet in a 10” rough-in bathroom. If you have a 10” rough-in, you will need to find a toilet that is specifically designed for that size rough-in.

This is the toilet you need for a 8 inch rough in. It is durable and will get the job done right.

How do I know if I need 10-inch or 12-inch rough in toilet

If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 115 and 125 inches, it is a 12-inch rough-in.

See also  Delta 1.28 gpf 4.8 lpf toilet?

When measuring for toilet rough in dimensions, be sure to measure from the wall behind the toilet to the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases. Keep in mind that your rough in measurement will need to be accurate in order to ensure that your toilet is installed properly.

Does toilet rough-in size matter?

When you’re shopping for a new toilet, you’ll need to make sure that the dimensions will fit your space. The best way to do this is to measure the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s important to do this measurement before you remove the old toilet so that you can be sure that the new one will fit.

Most codes require a minimum of 15 inches from any side wall or obstruction, measured from the center of the toilet. The NKBA (National Kitchen and Bath Association) actually recommends a minimum of 32 inches center to center to any other sanitary fixture. There should be at least 24 inches of clear space in front of a toilet or bidet.

What’s the difference between a 10 inch rough in a 12 inch rough in toilet?

If you’re looking at the distance between the wall and the center of the closet flange, the most common options are 10″ or 12″. 10″ rough tanks are slimmer to allow for the decreased distance.

A toilet offset flange is a device that you can use to create extra space around your toilet’s sewage pipe. This is especially useful if you need to make repairs or replacements to the pipe. The flange comes in two sizes to fit either 3-inch or 4-inch sewage pipes.

How do I know if my toilet is 2 or 3 inches

If your toilet is constantly running or not flushing properly, it could be time to replace the flapper. The flapper is the rubber seal located at the bottom of the tank that controls the release of water into the bowl. Over time, the flapper can become warped or cracked, which can cause it to leak. To determine what size flapper you need, look at the flush valve drain opening at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.

See also  American standard toilet seat hinge replacement?

It’s important to know the size of your rough-in when buying a toilet. Elongated toilets come in two different size options: 10” or 14”. Make sure to measure your rough-in before purchasing a toilet to ensure the perfect fit.

Are all toilets the same distance from the wall?

If you are installing a new toilet, be sure to leave at least 15 inches of space from the flange to any nearby fixtures or walls. This will ensure that your toilet has enough room to function properly. You can add more space if you like, but 15 inches is the absolute minimum.

There are offset toilets available that have the back of the tank further away from the wall, but the “rough-in” dimension is still the standard 12 inches. This is because the sewer pipe is still in the same location. If you have a smaller bathroom, you may want to consider an offset toilet to give you more space.

Can you replace a 10 inch rough-in toilet with a 12 inch

Toilets can be installed in spaces with different rough-in measurements, but it is ideal if the rough-in for the toilet matches the rough-in for the bathroom plumbing. Having a toilet with a 10-inch rough-in installed in a space with a 12-inch rough-in may result in some difficulty in flushing the toilet or connecting the toilet to the plumbing.

When tightening a toilet bowl, it is best to use a turn or two a side until you feel resistance. You should then try to wiggle the toilet bowl slightly. If there is no significant movement, you are most likely tight enough. This tightening operation is a “feel” thing you get from experience, so be conservative and use your best judgement.

See also  Toilet still leaking after replacing wax ring?

How do I choose the right size toilet?

If you’re planning on installing a new toilet, it’s important to first measure the rough-in dimensions. The standard rough-in is 12-inches, but you may find some older homes with a 10 or 14-inch rough-in. To determine the rough-in for your bathroom, simply measure from the wall behind the toilet to the middle of the bolts on the base of the toilet. Once you know the rough-in, you can then choose a toilet that will fit properly in your space.

When you are installing a new water closet, make sure to measure from the finished back wall to the center of the closet flange. This measurement should be 12 inches. Do not measure from the base molding!

Should a toilet be flush with the wall

There are a few things to keep in mind when it comes to the placement of your toilet’s flange. First, any sidewall or nearby fixture must be at least 15″ away from the flange. 15″ is the absolute minimum, but a distance of 18″ or more is ideal. Additionally, a 15-inch distance from the vanity, shower, tub and back and side walls are required to accommodate the flange.

If you install the toilet flange on top of the finished floor, you can avoid leak paths forming. This is because the flange will be at the correct height to accept the horn at the bottom of the toilet, which prevents any gaps from forming.

Is it hard to move a toilet over a few inches

If you’re planning on moving your toilet more than just a couple of inches, you’ll need to do some demolition to access and relocate water and waste lines. Once that’s done, you’ll need to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.

A standard toilet flange should fit snugly into the outflow pipe and sit level with the subfloor. Installing a new one without first removing the old one will make it impossible to form a seal and keep the toilet bowl bolted securely in place.

Warp Up

There is no definitive answer to this question since it can vary depending on the type of toilet you have and the specific measurements of your bathroom. However, a safe estimation would be that you need at least a 9 inch rough-in toilet in order to ensure that it will fit properly and function correctly in your bathroom.

There are many types of toilets available on the market, but the 9 inch rough toilet is one of the best. It is durable, reliable and easy to install. This toilet is a great choice for any home.