A grinder pump toilet is a type of toilet that uses a grinder pump to force sewage through a small diameter pipe to a sewer system or septic tank.
A grinder pump toilet is a special type of toilet that grinds up waste and pumps it out of the home instead of relying on gravity to do the job.
Table of Contents
What is a grinder pump toilet?
A grinder pump is a pump unit that is located at a low point in your house or in your yard. The grinder pump grinds up the wastewater and pumps it to the nearest gravity sewer in the public street.
If you notice slow drains or a large number of clogs in your home, it is likely that grease and dirt have built up in the grinder pump, causing a blockage. If sewage backs up into your home, this is a sign that the pump is not working properly and you should call a professional plumber immediately. A large enough item becoming stuck inside the pump will then allow smaller items to build up, causing clots.
What happens when a grinder pump stops working
If your home’s water pump stops working, the alarm panel’s red light will blink and a buzzer will sound. If the alarm doesn’t turn off after a few minutes, call for service.
A brand new grinder pump starts at just $300, but these are more affordable models with plastic cutting blades. The price range for a conventional grinding pump is $1,000 to $2,500.
What should you not flush in a grinder pump?
Flushing dental floss, fats, oils, grease or grit (FOGG), feminine hygiene products, condoms, diapers, wipes, cotton swabs, cigarette butts, coffee grounds, cat litter, or other items down the toilet can clog and damage your Grinder system. These items should be disposed of in your garbage can.
A grinder pump is a submersible pump that is installed along the drain line to a municipal sewer system or private septic tank when the pipe slope is not enough to flow by gravity. The pump grinds the sewage and pumps it to the municipal sewer system or private septic tank. You can expect a sewage grinder pump to last 6 to 16 years, with an average of 9 years.
Can you flush tampons with a grinder pump?
A sewage grinder pump can easily handle 2 inch solids, and will also be able to handle difficult artificial solids, like feminine hygiene products (pads, tampons, etc), rags, towels, diapers, diaper wipes, napkins, underwear, and a range of other things that shouldn’t be flushed down toilets but often are.
You should always troubleshoot your sewage ejector pump if you think there may be a problem, as small issues can often be resolved quickly and easily without requiring a replacement pump. However, if your pump is truly beyond repair, then it is important to choose a replacement pump that is the right size and type for your needs, as well as to have it installed properly to avoid any future problems.
Can you flush wipes with a grinder pump
Bo Gell is correct – grinder pumps can help move flushable wipes to the larger sewer system if used in a properly designed system. However, they are not a cure-all for a clogging system. If flushable wipes are present in the wastewater stream, it is important to have a properly designed system in place to ensure that they are properly processed and do not cause clogs.
However, several chemicals and materials should never enter the grinder pump sewer system. Note how small the path is for the wastewater in the diagram! Strong chemicals, toxic, caustic, or poisonous substances (this includes Drano, Mr Plumber, etc.
Should you buy a house with a grinder pump?
If you live in an area that is far from the city sewer line, then you may need a grinder pump. However, you should never combine a grinder pump with a septic tank. If your pump needs repair, a plumber can charge up to $150 per hour, plus the cost of parts.
The majority of grinder pump issues are caused by things that people flush down the toilet or pour down the drain. Disposable wipes, grease and feminine hygiene products are the most common causes of grinder pumpfailure.
How do I keep my grinder pump clean
If you’re vacating a property for an extended period of time, make sure to run water down a drain until the pump turns on. This will help flush out the pump and prevent odors.
Septic grinder pumps should not be paired with septic tank systems because the slurry is so finely ground that it won’t separate from the liquid once inside the septic tank. This means that it won’t get sent on to the secondary system, which can destroy your underground leach field.
Is a grinder pump the same as a septic system?
If you’re connecting to a septic tank, it’s not recommended to use a grinder pump at all. They pulverize the particles so well that solids can’t separate from the liquid, which is how septic systems work to treat wastewater.
If the power goes out, the grinder pump will not work. However, the pump unit does have storage capacity. During power outages, the two largest producers of wastewater (dishwater and washing machine) are not in use; therefore, your water usage decreases.
How far can a grinder pump push sewage
Sewage grinders are designed to handle low volumes of sewage (30 gallons per minute or less), but can push it over longer distances (thousands of feet) and can handle head pressures of up to 130 feet.
If your grinder pump alarm sounds, DO call the 24 hour emergency service line at 888-481-0439 as soon as possible. The alarm will have a red light and a buzzer will sound. To silence the buzzer, push the reset button located on the underside of the panel mounted on the house.
Why is my grinder pump so loud
If your pump is making a strange, whirring noise when it’s activated, this could be a sign of clotting. Clotting occurs after larger pieces of debris get caught and stick to the inner workings of the pump. This debris accumulates over time and can expand within the pump. If this is the case, it’s important to have the pump serviced so that the clotting doesn’t cause any damage.
If you notice any of the following five signs, it may be time to replace your grinder pump:
1. Your water pressure is working slow.
2. Sewage leaks.
3. Power outage.
4. Improper level installation.
5. It’s been a few years.
Are grinder pumps reliable
Even in ideal conditions, grinder pumps typically only last a few years before replacement or repair is needed. This is due to the nature of the pump itself, which is constantly grinding up waste material. Over time, this wear and tear takes its toll, and the pump gradually loses its effectiveness. In most cases, it is simply not cost-effective to try to repair a grinder pump, so replacement is the best option.
A grinder pump is a type of sewage pump that includes a cutting mechanism to grind solids into smaller pieces. This makes it easier for the pump to transport the sewage through pipes. Grinder pumps are typically used in areas where the sewer system is not able to handle the amount of waste being generated.
Final Words
A grinder pump toilet is a type of toilet that uses a grinder pump to grind up waste material before it is flushed away. These toilets are typically used in commercial and industrial settings where a large amount of waste needs to be processed quickly and efficiently.
While a grinder pump toilet may cost more than a traditional one, it is definitely worth the investment. Not only does it save you money in the long run, but it also grinds up waste so that it can be flushed away easily. Furthermore, it is much quieter than a traditional toilet and does not require any special installation.