There are many factors to consider when choosing a toilet paper holder, including height. A holder that is too low or too high can be inconvenient and uncomfortable to use. The ideal height for a toilet paper holder depends on the height of the person using it. For someone of average height, a holder that is about 26 inches off the ground is a good choice.
There is no definitive answer to this question as the ideal height for a toilet paper holder will vary depending on the individual and the specific bathroom layout. However, a good general rule of thumb is to install the toilet paper holder at a height that is comfortable for the average person to reach.
Table of Contents
Where should a toilet roll holder be placed?
There are a few things to keep in mind when choosing the right positioning for your toilet paper holder. In general, it is standard to install toilet paper holders on the wall 26 inches above the floor and 8 to 12 inches in front of the toilet. However, you may want to adjust these measurements depending on the size of your bathroom and the placement of your other bathroom fixtures. When you are happy with the placement, position the product on the wall and use a pencil to mark the top and bottom screw positions.
The National Kitchen and Bath Association (NKBA) recommends that the toilet paper holder be placed 8 to 12 inches in front of the toilet rim, and 26 inches above the finished floor. This recommended height is good for both comfort height toilets and standard toilets, which are lower than 26 inches.
Should toilet paper hang under or over the roll
It is important to hang toilet paper in the correct way in order to prevent the spread of bacteria. The correct way to hang toilet paper is “over” rather than “under.” This is because “under” increases the possibility that food-poisoning bacteria will spread from the restroom to the rest of the workplace.
If you’re looking to avoid touching dirty surfaces around your toilet paper dispenser, experts say the best place for the roll is on the back of the bar, with the paper hanging below. This way, you won’t have to reach over any nasty areas when you’re trying to grab the last sheet.
Are all toilets 12 inches from wall?
If you’re looking for a toilet, it’s important to know the rough-in measurement. Most toilets will have a 12 inch rough-in, but toilets with a 10- or 14-inch rough-in measurement are a little less common. If you’re replacing an existing toilet, look for a replacement toilet with the same rough-in measurement.
Before you start installation, use a level to make sure the wall is straight. Then, tape the template to the wall. A standard rule is that toilet paper holders are set about 26 inches above the floor. It should also be 10 inches in front of or next to the toilet.
What is code for distance from toilet to vanity?
A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″.
The 1891 patent for the toilet paper roll literally states that the end of the roll should be hanging off the exterior. In other words, the patent, created by the inventor of toilet paper Seth Wheeler, reveals the correct way to hang toilet paper on the holder is actually over.
Why do people hang their toilet paper under
There are several reasons why people prefer to put the toilet paper roll under the bathroom tissue dispenser, rather than over. The under position provides a tidier appearance, in that the loose end can be more hidden from view. It also reduces the risk of a toddler or a house pet, such as a cat, unrolling the toilet paper when batting at the roll. And in a recreational vehicle, it may reduce unrolling during driving.
It’s important to hang your toilet paper under, rather than over, to reduce the amount of contact you’ll have with the wall and your bathroom buddies. Hanging over exposes your fingers and the next person’s to more bacteria, while hanging under keeps them more clean.
Should the toilet seat be up or down while pooping?
It is generally considered polite to leave the toilet seat down after use. It is also more hygienic, as it prevents urine and other germs from coming into contact with the seat.
A 12-inch rough-in is the industry standard for toilets, meaning that the distance from the center of the drain to the wall is 12 inches. Most toilets will fit this rough-in, but it’s important to measure before buying a new toilet to be sure. The standard rough-in is 12 inches, but some toilets may require a 10- or 14-inch rough-in.
Can a toilet be more than 12 inches from the wall
This is an important measurement to keep in mind when considering a toilet for your bathroom. The minimum clearance from the center of the toilet to any adjacent fixture or wall is 15 inches, so be sure to take that into account when making your decision.
Comfort height is the height that meets ADA standards. It is more comfortable for taller people and for people who have a hard time getting up from a low seat, like the elderly or disabled. It will measure 17 to 19 inches from the floor to the seat.
How many inches do you need on each side of the toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. The NKBA actually recommends 32 inches.
There must be a clearance around a toilet of a minimum of 60” from a side wall. Also, the water closet, measured perpendicular from the rear wall, must be a minimum of 56” deep for wall mounted units and a minimum of 59” deep for floor mounted units to allow wheelchair access.
Conclusion
18 inches
There are a few things to consider when choosing a toilet paper holder – height is just one of them. Some people prefer a higher holder so they don’t have to stoop down as far, while others prefer a lower holder for a more compact look. There are also holders that can be mounted on the wall or the side of the toilet itself. Ultimately, it’s up to the individual to decide what height is best for their needs.