A towel bar provides a convenient place to hang damp towels to dry, or to grab a dry towel for use. Most towel bars are supplied with two metal support brackets, screws and drywall anchors. The support brackets are fitted with plastic or rubber ends to prevent damage to the towel bar and to provide a slip-resistant grip. Installing a towel bar is a relatively easy do-it-yourself home improvement project.
To mount a towel bar, first find the studs in your wall using a stud finder. Then, mark the location of the towel bar on the wall. Next, drill pilot holes into the wall at the marks. Finally, use screws to attach the towel bar to the wall.
Table of Contents
How do you anchor a towel bar?
To hang a towel bar, first attach one of the bar holders to the bracket using the set screw and wrench provided. Then slide the bar into place and attach the next bar holder. Put a little pressure on the towel bar to make sure it is secure. Finally, hang towels.
Installing a towel bar is a pretty easy task that most people can do without too much trouble. Just follow the steps outlined above and you should have no issues.
Do you need studs to mount towel bar
If you’re looking for a good, secure way to anchor a towel bar, studs are the way to go. However, if there isn’t a stud where you want the towel bar to be, you’ll need to find a good anchor for the screws in the drywall. The cone-shaped plastic anchors that are often packaged with the towel bar are not very reliable and can easily be pulled out.
There are a few things to keep in mind when hunging a towel bar. The average height of a towel bar should be 48 inches from the floor. This is also true for the hand towel ring. If you have a taller person in your home, you may want to consider hunging the towel bar a bit higher. Another thing to keep in mind is the type of towel you will be using. If you plan on using larger, thicker towels, you may want to get a towel bar that is a bit wider.
Do towels dry better on hooks or bars?
Towel bars are a great way to keep your towels organized and tidy. They allow your towels to dry quickly and evenly, so you don’t have to worry about them getting bunched up and wet. Plus, they look great in any bathroom!
If your wall mounted bar isn’t secure, first check to see if the screws holding the mounting plates in place are tight. If they are, simply remount the posts and bar. If the screws are loose, remove them and the mounting plates. To remove old anchors, pry them out with a screwdriver or poke them in and let them fall inside the wall.
Can I use Command strips to hang a towel bar?
This is a great product! It’s very easy to install – no tools, nails or screws needed. With the Command strips, it holds strongly to about any surface. I set it up in just a few minutes.
1. Apply a small bead of glue to the back of the towel rack or mounting brackets and press them firmly into place.
2. Do not apply too much adhesive—your product instructions should give you information on the amount you need.
3. Quickly clean up any glue that has seeped out around the edges.
Do Command hooks work for towels
The Command Large Towel Hook allows you to keep towels or robes off the floor and hung up neatly so that they can dry in between uses. The hook sticks to many surfaces including glass, mirror, tile, fiberglass, wood and painted surfaces.
This is an ideal product for your bathroom storage needs. The suction cups and flat steel trim will compliment any bathroom design.
Can you hang a towel hook on drywall?
installed a drywall anchor for your towel hook if you aren’t going into a stud Towels aren’t that heavy, but they’re definitely heavy enough to need some extra support! There are a ton of different types of anchors you can use, and your towel hook may come with one.
If you’re looking to hang a piece on an area with no studs, using a toggle bolt or anchor is a great option. Keep in mind though that the weight of the piece, as well as the thickness of the wall, will dictate the size of the toggle needed. According to This Old House, a typical metal toggle bolt can hold 25 to 50 pounds on plaster. A plastic one can hold 10 to 25 pounds.
How far away from shower should towel bar be
A heated towel rack needs to be installed at least 24” away from a wet location like a shower, tub, etc. You’ll also want to check your local electrical code prior to installation.
There are a few things to keep in mind when hunging photos:
-You want to make sure the photos are spaced out evenly. This creates a more visually appealing look.
-Think about the wall space you have to work with. You don’t want the photos to be too close together or too far apart.
-Consider the photos you are hanging. Make sure they are all of a similar theme or style. This will make your display more cohesive.
How far off the counter should a hand towel bar be?
There are a few things to keep in mind when deciding where to place your towel bar. First, the bar should be located anywhere from 14 to 18 inches above the vanity countertop. If you have a towel bar that also has a shelf above it, the bar itself should measure roughly 48 inches above the floor.Second, keep in mind the height of your tallest family member when deciding where to place the towel bar. You don’t want it to be too high or too low for anyone to reach. And finally, make sure the towel bar is easily accessible from the toilet and bathtub – you don’t want to have to climb over anything to reach it!
Towel bars are a great way to keep your towels organized and within easy reach. They come in a variety of styles and finishes to coordinate with your bathroom décor. Towel bars with the added feature of heating are great for chilly mornings or after a relaxing bath.
Conclusion
To mount a towel bar, first measure the space where you want to install it. Then mark the placement of the screws with a pencil. Drill pilot holes for the screws, and then screw the towel bar into place.
Be sure to use the proper tools for the job so that your towel bar will be secure. With a little care and the right supplies, you can easily mount a new towel bar in your bathroom.