Skip to content

Installing a toilet paper holder?

Most people don’t give their toilet paper holder a second thought – it just hangs there on the wall, doing its job without any fuss. But when it’s time to install a new toilet paper holder, or you’re moving into a new home and need to install one for the first time, it can be trickier than you’d think. Here’s a quick guide to installing a toilet paper holder so you can get the job done quickly and efficiently.

To install a toilet paper holder, you will need a drill, a screwdriver, a level, and a tape measure. First, find the studs in your wall using a tape measure and mark them with a pencil. Then, using your drill, create pilot holes at your marks. Next, using your screwdriver, attach the toilet paper holder to the wall using the screws that came with it. Finally, use your level to make sure the holder is level, and you’re done!

Is there a correct way to place toilet paper holder?

There is no single answer to this question as the optimal height for a toilet paper holder may vary depending on the individual and the specific bathroom layout. However, a standard rule of thumb is that the holder should be set about 26 inches above the floor, and 10 inches in front of or next to the toilet.

If you’re using Errol’s brackets, make sure they’re pointing in the right direction using the provided arrow. Otherwise, your results may not be accurate.

See also  Toilet repair murrieta?

How high should you install a toilet paper holder

When installing a wall-mounted toilet paper holder, it is best to install it 26 inches above the floor, on center. This means that the center of the holder, as opposed to the bottom or top of it, is 26 inches above the floor.

There are a few things to keep in mind when choosing the right positioning for your toilet paper holder. In general, it is standard to install toilet paper holders on the wall 26 inches above the floor and 8 to 12 inches in front of the toilet. However, you may want to adjust these measurements depending on the size of your bathroom and the placement of your other bathroom fixtures. Once you have found the perfect spot, use a pencil to mark the top and bottom screw positions.

Which side should tissue holder be?

It can be difficult to know where to place a spare toilet paper roll. If you’re looking for ideas, consider placing the roll on the sink next to the toilet or on the back of the toilet. This way, users can grab the roll at their own convenience.

If you’re having trouble finding a stud to screw your toilet paper holder into, you can try using wall anchors instead. Just make sure to insert them into the drywall before screwing the holder in place.

How far from back wall should toilet paper holder be?

According to “Residential Design and Build Magazine,” the minimum distance between the toilet and the toilet paper holder is eight inches in front of the toilet on the side wall. It can be on the side of the toilet if the wall is eight or more inches away from the toilet.

A new study has found that the correct way to hang toilet paper is “over” rather than “under” in order to prevent the spread of food-poisoning bacteria. The research found that “under” vastly increases the possibility that bacteria will spread from the restroom to the rest of the workplace. This is due to the fact that when toilet paper is hung “under,” it is more likely to come into contact with contaminated surfaces, such as the floor or the toilet bowl.

See also  Gerber 10 inch rough in toilet?

What do you do if your wall doesn’t have a stud

There are a few things to keep in mind when using hollow-wall anchors:

-The size of the anchor should be appropriate for the weight of the object you’re hanging.
-Be sure to read the instructions that come with the anchors, as there can be some variation in how they’re used.
-It’s also a good idea to drill a pilot hole before screwing in the anchor.

There are a few different ways that you can go about finding nails in the More. The first method is to simply look for them. This can be done by scanning the More with your eyes and looking for any nails that may be poking out. Another method is to feel around the More with your hands. This can help you to identify any areas where nails may be present. Finally, you can use a tool to help you locate nails in the More. This could be a small flashlight or a magnet. If you are having trouble finding nails in the More, then you can always ask a professional for help.

How do you hang something heavy on drywall without studs?

If you’re looking to hang a piece on an area with no studs, This Old House recommends using a toggle bolt or anchor. The size of the toggle will be dictated by the weight of the piece and the thickness of the wall. They note that metal toggle bolts can typically hold 25-50lbs on plaster, while plastic ones can hold 10-25lbs.

This is an important measurement to keep in mind when choosing a toilet, as you need to make sure there is enough clearance around it. The minimum clearance is 15 inches, so make sure there is at least that much space around the toilet before you buy it.

See also  Kohler elliston toilet reviews?

What is the standard toilet distance from wall

According to the National Kitchen and Bath Association (NKBA), the minimum clear space in front of a toilet or bidet should be 24 inches. Most codes require at least 15 inches of clear space from any side wall or obstruction, and not closer than 30 inches center to center to any other sanitary fixture. The NKBA actually recommends 32 inches of clear space.

There is no hard-fast rule about whether a toilet should touch the wall, as it is a matter of personal preference. Some people are okay with a toilet tank’s top touching the back wall, while others desire a minimum of one inch of space between the commode and the back wall.

Why do people put toilet paper under instead of over?

There are several reasons to choose the under position when toilet paper roll is present. It provides a tidier appearance, in that the loose end can be more hidden from view. This also reduces the risk of a toddler or a house pet such as a cat unrolling the toilet paper when batting at the roll. In a recreational vehicle, this may reduce unrolling during driving.

As you can see from the answer above, the preferred position for wiping is “over” rather than “under”. This is due to the fact that it is easier to access the free end of the toilet paper and minimize the risk of knuckle-on-wall germ gathering.


There is no one-size-fits-all answer to this question, as the installation process for a toilet paper holder will vary depending on the type and model of holder you have. However, in general, the installation process for a toilet paper holder is relatively simple and can be done in just a few minutes with a few basic tools.

After carefully measuring the wall and aligning the screws, I was able to install the toilet paper holder! It was a lot easier than I thought and now I can enjoy not having to search for a place to put my toilet paper.