Skip to content

Lowe’s vs home depot toilet installation?

In the market for a new toilet? If you’re torn between Lowe’s and Home Depot, this article is for you. We’ll compare toilet installation costs, selection, and quality at both Lowe’s and Home Depot, so you can make the best decision for your home.

The two home improvement stores are very similar in many ways, but there are some key differences when it comes to toilet installation. Home Depot is typically the less expensive option, butLowe’s often has more sales and promotions. Installation services are available at both stores, but Lowe’s offers a larger selection of toilets to choose from. Ultimately, the best store for you depends on your budget and needs.

How much does Home Depot charge to install a toilet?

If you’re looking to install a toilet in your home, you can expect to pay an average of $348 for the unit itself. Basic installation will set you back an additional $115, bringing the total cost to around $463.

Toilet installation costs can range from $224 to $532, with the national average at $372. The overall cost depends on the type of toilet and the complexity of the job. It takes approximately 2 to 4 hours for a plumber to install a toilet at a base rate of $65 per hour.

Does Lowes take old toilets

If you’re looking for a toilet installation service that includes everything from picking up your new toilet to delivery and installation, look no further! Our team will even haul away your old toilet for you (local dump fee may apply).

If you’re looking to replace your toilet, you can expect to pay between $275 and $480. This includes removing the old toilet and installing the new toilet. Keep in mind that the cost will vary depending on the type of toilet you choose and the complexity of the installation.

See also  Gerber side mount toilet handle?

How long does it take a professional to install a toilet?

There is no one definitive answer to this question. In general, it will depend on your skill level and experience, as well as the type of toilet you have. If you have done this type of work before, it should be relatively easy. However, if it is your first time, and depending on the complexity of the job, it could take anywhere from one to four hours.

If you’re thinking about installing a toilet, it’s best to hire a professional. A professional can handle whatever comes their way, including leaks, broken pipes, mold, and damaged or rotting subflooring. Plus, if you lack the experience and the tools for the job, a professional can make sure the job is done right.

Is one piece or two piece toilets better?

The one-piece toilet is becoming increasingly popular for a number of reasons. They are more durable than two-piece toilets since they are made from one solid piece of ceramic. This eliminates exposed plumbing and flushing elements that can become damaged over time. Additionally, one-piece toilets tend to be more compact, making them ideal for small bathrooms where space is at a premium.

Installing a new toilet may seem like a daunting task, but it’s actually not too difficult. All you need is a few hours, a helper, and the right tools and toilet parts. With a little bit of know-how, you’ll be able to install your new toilet in no time.

How much does a plumber charge to replace the guts of a toilet

If you have a broken toilet, the average cost for fixing it is $250. However, the cost can range from $150 to $400, depending on the extent of the damage and the plumber’s fee. In many cases, plumbers will charge a flat rate for basic toilet repairs.

If you’ve noticed any of the following issues with your toilet, it may be time for a replacement:

1. Constant clogging – if you find yourself having to plunger your toilet more often than usual, it may be time for a new one.

2. Cracks in the porcelain – if you see any cracks, this is a sign that your toilet is starting to deteriorate and may leak soon.

See also  Onyx collection bathroom?

3. Excessive age – if your toilet is more than 20 years old, it may be less efficient and less effective than a newer model.

4. Wobbling – if your toilet is unstable, this could be a sign that the porcelain is cracked and needs to be replaced.

5. Inefficient flushing – if your toilet takes a long time to flush or doesn’t seem to be flushing properly, it may need to be replaced.

6. Surface damages – if the surface of your toilet is scratched, chipped, or cracked, it may be time for a new one.

7. Built-up mineral deposits – if you notice a lot of mineral deposits build-up around your toilet, this can clog the plumbing and cause problems.

What do I need to know about replacing a toilet?

There are a few things to keep in mind when replacing a toilet in your home:

-Ensure that the new toilet will fit properly in the space – this may require measuring the rough-in distance to ensure you get the right size toilet.

-Replace the water supply line if it is old or leaking.

-Angle stops (the shut-off valves for the water supply) are often hidden behind the toilet and may need to be replaced as well.

-The escutcheon (the metal or plastic plate around the base of the toilet) needs to be properly sealed with caulking to prevent leaks.

-Finally, check the toilet flange (the connection between the toilet and the sewer pipe) to make sure it is in good condition and properly sealed.

If you’re not satisfied with your purchase from Lowe’s, you can return most new and unused items within 90 days for a refund or exchange. Exceptions to this policy include items noted in our Return Policy Exceptions. Proof of purchase is required for all returns and exchanges.

How much should you spend on a toilet

It’s important to get a good toilet that will last for years. Plan to spend around $100-$500 for a gravity toilet, and $225-$600 for a pressure-assist model.

If your old toilets are starting to show their age, it may be time to consider toilet replacement. Newer models are more efficient and may save you money in the long run. Keep in mind that if your old toilets are leaking, cracked, or clogging, repair may not be an option.

See also  Bpa free toilet paper?

How long does a plumber take to change a toilet?

If you need to remove and replace a toilet, it will usually take a professional plumber about 30 minutes. However, this may vary depending on the type of toilet and any other issues that may be present.

If you’re purchasing a new toilet, be sure to check that it comes with most of the parts you’ll need. These include brass closet bolts (to connect the toilet to the flange), a gasket for connecting the tank to the base, a wax ring, a fill valve, flush valve and flapper. By doing this, you can be sure you have everything you need to install your new toilet.

How do you know if you install a toilet correctly

If you notice any water leakage from the toilet base, it is a sign that the installation was not done properly. Another sign is if you notice a sewage odour coming from the toilet. This could be due to a loose flange or a movement in the toilet.

Removing an old toilet and installing a new one is a relatively easy do-it-yourself project. The first real step in replacing a toilet is disconnecting your existing toilet from the supply line and unbolting it from the floor. Use an adjustable wrench to disconnect your old unit from the water supply line, and remove the caps covering toilet base bolts.

Should you caulk around a toilet

It is important to caulk your toilet to the floor in order to keep it secure and avoid any potential injuries or toilet malfunctions. According to the International Plumbing Code, caulking a toilet to the floor is required, and now that you know the reasoning behind it, there is no reason not to do so!

When installing a toilet, it is usually best to use a wax ring.However, it is a good idea to have a backup wax ring in case there is damage during the installation process.If you do not want to use a wax ring, you can try using a wax-free ring instead.Wax-free rings fix on the flange, which is the lip around the toilet outlet, rather than on the toilet itself.

Conclusion

There is no definitive answer to this question as it depends on a number of factors, such as the type of toilet you have, the location of your home, and your personal preferences. However, generally speaking, Lowe’s tends to be slightly cheaper than Home Depot for toilet installation services.

There is no clear winner when it comes to toilet installation between Lowe’s and Home Depot. Both stores offer similar services at similar prices. However, Home Depot may have a slight edge when it comes to customer satisfaction.