Skip to content

Moen shower valve install?

A Moen shower valve is a valve that is installed in your shower that controls the water pressure and temperature. There are many different types of Moen shower valves, so it is important to choose the right one for your needs.

1. Turn off the water to the shower.

2. Remove the old shower valve.

3. Install the new shower valve.

4. Turn on the water to the shower.

Do all Moen showers use the same valve?

Moen manufactures many types of shower rough-in valves, including four types of single handle shower valves. The trim kits are not interchangeable. It is important to identify which valve is currently installed by looking at the escutcheon screw location and the handle operation.

The center line of the supply and discharge piping should be a maximum of 2-3/16″ (56mm) and a minimum of 1-7/16″ (37mm) behind the finished wall surface. This will ensure that the piping is properly supported and will not be damaged by construction traffic.

What does a plumber charge to install a shower valve

If you’re in need of a new shower valve, you can expect to pay an average of $315 for the replacement. However, costs can range anywhere from $125 to $500, depending on the type of valve you need and the complexity of the installation.

See also  Cast iron closet flange replacement?

Diverter valves are simple devices that control the direction of water flow. They are used to choose between the wand and the shower head. Diverters are typically easy to install.

How do I know what model Moen shower valve I have?

If you need to find your model number, it will be on the box or instruction sheet. If you can’t find it there, look on the back of the spout (non pullout) for the general family series number.

Moen 1222 shower valves are turned on by rotating the handle. There is no volume control, so you simply rotate the handle counter-clockwise to open the flow of water and find your desired temperature.

In what position should a valve never be installed?

PRVs, or pressure relief valves, are designed to release pressure in a system when it gets too high. For this reason, it’s important that they are installed in the correct position – vertical and with the spindle vertical. This ensures that they will work properly and release pressure when needed.

If you can design a shower with an off-center drain, it’s probably best to do so. That way, you won’t be as likely to block the drain with your feet while you’re showering.

What is the rough in height for a shower valve

There is no definitive answer for the ideal height of a shower valve, as it depends on personal preference and the specific layout of your bathroom. However, the average height for a shower valve is 30-50 inches above the floor. For tub-shower units, the height can be just a few inches about the tub or directly on the tub as part of the faucet. Ultimately, it is important to choose a height that is comfortable for you and will work well with the design of your bathroom.

See also  Pee guard for toilet?

Replacing a shower valve is a more complicated task than just changing a showerhead. You need to have a good knowledge of plumbing in order to do it successfully.

Do I need a plumber or electrician to fix shower?

Electric showers are a great way to have instant hot water, but they can be tricky to install. If you’re not comfortable working with electricity, it’s best to leave it to a professional.

If you need to replace a valve, it is usually easy to do and only takes a couple of hours. However, if the valve is hidden behind cabinetry or other barriers, it can take several hours to complete the job since you will need to remove and then reinstall the barriers.

Do you need a plumber to replace a shower valve

If you’re not experienced with plumbing, it’s worth hiring a professional to install your valve. It’s a moderately skilled job, so it’s best to leave it to someone who knows what they’re doing.

Looking for a top quality Moen showerhead? The Moen 26009 Engage Magnetix 25 GPM Handheld/Rain Shower Head is our top pick for its two-in-one configuration and magnetic docking system. This shower head is sure to provide a great showering experience.

Can you replace a shower valve without soldering?

The iBox makes shower faucet replacement simple and straight forward. Plus, there’s no need to solder or sweat copper pipe! This is a great product for beginner DIYers.

These are the most common models of Moen shower valves and they all use the same type of cartridge. The 1225 is the most common and is used in most showers. The 1200 is the next most common and is used in some showers. The 1222 is the pressure balancing cartridge and is used in some showers.

See also  Can you stack toilet flange spacers?


1. Begin by shutting off the water to your home at the main water valve.

2. Remove the old shower valve by unscrewing it from the wall.

3. Wrap the threads on the new valve with plumber’s tape.

4. Screw the new valve into the wall and turn on the water to your home.

5. Test the new valve by turning on the shower.

It is fairly easy to install a Moen shower valve once you have the hang of it. You need to be careful when attaching the water lines and make sure they are tight so there are no leaks. It is also important to test the shower valve before you use it to make sure it is working properly.