It’s not fun dealing with a clogged toilet or shower, but it’s something that happens to most of us at some point. There are a few things you can try to unclog your toilet or shower on your own, but if those don’t work, you’ll need to call a plumber.
If your toilet and shower are both clogged, there are a few things you can try to unclog them. First, try using a plunger to unclog your toilet. If that doesn’t work, you can try using a plumber’s snake to clear the clog. If your shower is still clogged, you can try using a plunger or a plumber’s snake to clear the drain.
Table of Contents
Why is my toilet and shower both clogged?
If you have a clogged shower and toilet, it’s likely that you have an obstruction in your sewer line. The best solution is to hire a professional plumber to fix the problem. Trying to fix it yourself can make the problem worse and cause a lot of inconvenience.
If you notice a clog in your drain, there are a few ways you can try to remove it yourself before calling a plumber. Sometimes, the clog is immediately visible near the surface and easily accessible. In this case, you can try removing it by hand. If the clog is further down the drain, you can try using a drain snake or a plunger. Another option is to pour a pot of boiling water down the drain, which can help to loosen the clog. If these methods don’t work, you can try using a natural drain cleaner. If the clog is still not budging, you may need to remove and clean the drain trap. As a last resort, you can call a plumber to come and take care of the problem.
How do you know if your main line is clogged
If you notice any of the above signs, it’s likely that your main line is clogged. This can be a serious issue, as it can cause all sorts of problems for your drains. It’s best to call a professional to come and take a look at the issue as soon as possible.
If you have a main sewer line clog, follow these steps to clear it:
1. Loosen the cap on the drain pipe.
2. Allow any sewer buildup to come out of the drain.
3. Gently feed the auger cable into the main line drain.
4. Run the auger until the clog is broken up.
5. Hose out leftover debris.
6. Pull the auger cable back out of the main line drain.
What to do when the toilet is clogged and the water won’t go down?
If your toilet is clogged and a plunger or plumbing snake doesn’t work, you can try using water and soap. Boil a gallon of water and allow it to cool for about 10 minutes. Then pour a cup of liquid dish soap into the toilet bowl. Pour the water slowly into the bowl and leave it for about 20 minutes. Flush the toilet and see if the clog is gone.
If you have a more serious clog in your toilet and plungers aren’t working, you may need to use a toilet auger or toilet snake. This is a cable-like tool that plumbers twist in deep into the toilet to the clog.
Will Drano unclog sewer line?
Drano is not an effective way to unclog your drains, and it can actually be quite damaging to your plumbing system. The heat created by the chemical reaction is more than your drains are designed to take, and it can corrode and break down aging plumbing.
From what I gathered, it is possible to connect the toilet drainage line and the shower drainage line as long as they both have separate waste trap arms. Although, combining them may also lead to blockages which can cause smells to come from certain drains.
How do you unclog a main sewer line without a snake
This is a great tip for clearing clogs in drains! Just pour a cupful of baking soda down the drain, followed by a cupful of white vinegar. Wait 10-15 minutes for the baking soda and vinegar solution to break up and clear the clog.
While it is possible to unclog drains yourself, it is generally a better idea to call a professional plumber. A professional drain contractor can inspect your system and clean it more thoroughly than you would be able to do on your own. Additionally, if you have multiple clogged drains, a professional can help you determine the root cause of the problem and fix it, preventing future clogs.
How much does it cost to unclog a main pipe?
If you have a tough blockage in your sewer line, it could cost you anywhere from $100 to $900 to get it removed. The average cost to hydro jet a clogged sewer line is $350 to $600. If the problem is severe, the cost of hydro jetting could be $1,000 or higher.
If you have a clogged main sewer line, you can try using a mixture of baking soda and vinegar to dislodge the debris. Pour 60 gallons of water into the drain and add the baking soda and vinegar mixture in a 1:2 ratio. Use the plunger or drain snake to help push the water through the debris.
How long does it take to clear a clogged sewer line
The process of pumping water through the drains (at around 20 gallons per minute) takes around an hour to complete. After the dirt debris, roots, hair, oil, and other waste is thoroughly flushed out of the system, the technician does a final sewer camera inspection within an hour. This process is important in order to keep the drains clear and functioning properly.
Drano Drain Clog Remover is the best overall drain clog remover. It is made of 90% sodium hydroxide and is safe for all types of pipes. It is fast-acting and can dissolve hair, grease, and soap scum quickly.
FlexiSnake Drain Clog Remover is the most effective drain clog remover. It is made of flexible nylon bristles that can reach deep into pipes to remove hair, grease, and soap scum.
Green Gobbler Drain Clog Remover is the most eco-friendly drain clog remover. It is made of 100% natural ingredients, including citrus extract and enzymes. It is safe for all types of pipes and is biodegradable.
Drainsoon Drain Clog Remover is the best anti-skid handle drain clog remover. It is made of heavy-duty plastic and has a nonslip grip. It is also safe for all types of pipes.
Instant Power Drain Clog Remover is the most compatible drain clog remover. It is compatible with all types of pipes, including PVC, ABS, and cast iron. It is also safe for septic tanks.
Why isn’t my toilet unclogging with a plunger?
If you have a clogged toilet and there is no water in the bowl, you will need to pour water in until the plunger is covered. Use a gentle plunge at first so that you don’t force air back around the seal and blow water all over yourself and your bathroom floor.
If your toilet is clogged, you can try pouring hot water into it to loosen the clog. Boiling water can cause the toilet porcelain to crack, so be careful. Allow the hot fluid to sit in the toilet for a few minutes before flushing a couple of times to finish the job.
Will a clogged toilet eventually go down
If your toilet is clogged and the blockage is made of water-soluble materials, there is a chance that it will slowly dissolve in the water and clear the toilet. So, if the clog is primarily made of toilet paper, it may be able to clear itself.
There are a few things you can try before calling a plumber, but if the plunger isn’t working then it’s unlikely that anything else will. Baking soda and dish soap can sometimes break up a clog, but if the plunger can’t then it’s probably too big for those methods. Calling a plumber is the best bet in this case.
What is the best liquid to unclog toilet
This drain cleaner is not for those who are dealing with toilet clogs. Use a plunger or a natural drain cleaner for this issue.
If your drain is clogged, you can try making your own drain cleaner with baking soda, vinegar, and hot water. Dish soap can also help loosen some obstructions. Let the solution sit overnight and then flush the toilet to see if the obstruction has cleared.
Warp Up
The most likely cause of a clogged toilet and shower is a blockage in the home’s main sewer line. This blockage can be caused by a variety of things, including tree roots, grease, and debris.
The conclusion to this topic is that you need to unclog your toilet and shower.