Skip to content

Toilet 12 in rough in size?

There is no definitive answer to the question of what is the rough in size for toilet 12. However, the general consensus is that the rough in size for a toilet is the distance from the center of the drain to the centerline of the wall behind the toilet. The average rough in size for a toilet is between 10 and 12 inches.

There is no definitive answer to this question as the rough in size for a toilet can vary depending on the specific installation. However, a rough in size of 12 inches is generally considered to be standard for most toilet installations.

Can you replace a 10 inch rough in toilet with a 12-inch?

There are a few things to keep in mind when installing a toilet into a space with a different rough-in than the toilet is designed for. First, you may need to make some adjustments to the positioning of the toilet. Second, you may need to use a different size wax ring to create a seal between the toilet and the drain pipe. Finally, you may need to use a different size flange to secure the toilet to the floor.

If you’re planning on replacing an old toilet, it’s important to know the rough-in size. This is the distance from the center of the drain to the wall. The standard rough-in size for toilets is 12 inches, but it’s important to measure just to be sure. You’ll need at least 24 inches of clearance from the wall facing the bowl, and 15 inches on each side.

See also  Wet washcloth?

What’s the difference between a 10 inch rough in a 12-inch rough in toilet

The rough-in for a toilet is the distance from the wall behind the toilet to the centerline of the closet bolt holes. A standard 10″ rough-in means that the centerline of the closet bolts will be 10″ from the finished wall. Most toilets will work with either a 10″ or a 12″ rough-in, but a 10″ rough tank is slimmer to allow for the decreased distance.

A toilet’s rough-in size is the distance from the wall behind the toilet to the centerline of the flange where the toilet is anchored to the floor. The standard rough-in size for a toilet is 12 inches in contemporary houses and 10 inches in older homes. These are the toilet rough-in dimensions:

Supply line (vertical): 8 1/4 inches of height to accommodate most base moldings

Supply line (horizontal): 6 inches maximum to either side of the toilet centerline

How many inches does a toilet have to be away from the wall?

Most building codes require a minimum of 15 inches from any side wall or obstruction (measured from the center of the toilet) and not closer than 30 inches center to center to any other sanitary fixture. This ensures that there is enough space for a person to comfortably use the toilet and that there is enough space between fixtures to prevent cross contamination.

This is important because the center of the flange needs to be lined up with the sewer line in order for the toilet to function properly. If it is not lined up correctly, then the toilet will not flush properly.

See also  Standard shower head height from floor?

How do I know if my toilet is 2 or 3 inches?

The flush valve drain opening is located at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.

1. Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down).
2. If the toilet has four closet bolts, measure to the center of one of the rear ones.
3. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.

Are most toilets 12 inches from wall

If you are looking for a toilet with a 10- or 14-inch rough-in measurement, you may have a harder time finding one as they are less common. However, most toilets will have a 12 inch rough-in so you should have plenty of options to choose from.

The maximum distance of the toilet from the main drain should not exceed 4 meters in order to ensure an effective draining and to avoid bad smells and the problem of emptying the siphons. A minimum slope of 2% should be maintained within these limits to function properly.

What’s the minimum distance from toilet to sink?

If you are planning on placing a toilet in your bathroom, it is important to make sure that there is enough space around it. The National Kitchen and Bath Association (NKBA) recommends that there should be at least 18 inches of space between the toilet and another fixture or vanity. However, codes usually allow for a minimum distance of 15 inches. This will ensure that you have enough room to comfortably use the toilet without feeling cramped.

See also  What is the standard height for towel bars?

If you’re planning on moving your toilet more than a few inches, you’ll need to do some demolition to access and relocate the water and waste lines. Then you’ll need to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.

Should toilet flange be flush with floor

It’s important to install the toilet flange at the correct height. If it’s too low, leak paths can form.

The purpose of this rule is to ensure that the toilet flange is not obstructed by any fixtures or walls. This is important because the toilet flange needs to be able to be properly installed and function properly. Obstructions can cause the toilet flange to be installed incorrectly or not function properly.

Are most toilets 2 or 3 inch?

The flush valve drain opening is the best reference for determining the size of flapper your toilet needs. If the opening is two inches, then you need a two inch flapper. If the opening is three inches, then you need a three inch flapper.

The one-piece toilet is a great option for small bathrooms where space is at a premium. It is also more durable than the two-piece toilet since it is made of one solid piece of ceramic with fewer exposed plumbing or flushing elements.

Warp Up

There is no definitive answer to this question as the rough in size for a toilet can vary depending on the specific installation. However, a good rule of thumb is to use a 12″ rough in size for the toilet. This will ensure that the toilet is properly installed and will function properly.

There are many factors to consider when choosing a toilet, but the rough in size is an important one. Toilets with a rough in size of 12 inches are a good choice for most homes.