Skip to content

Toilet rough in sizes?

There are many different types and sizes of toilets, so it is important to know the rough in size of the space you have available in your bathroom before making a purchase. The standard rough in size for toilets is 12 inches, but there are also 10 and 14 inch options available. If you have a smaller bathroom, the 10 inch rough in size may be a better option for you.

There is no definitive answer to this question since there can be some variability in toilet rough in sizes. However, the most common rough in size for toilets is 12 inches. This means that the distance from the center of the drain to the back wall is 12 inches. There may be some toilets that have a different rough in size, but 12 inches is the most common.

How do I know if my toilet is a 10 or 12 rough?

If you’re planning on replacing your old toilet with a new one, it’s important to know the rough-in measurement. This is the distance from the center of the capped bolts on the bottom of the toilet to the wall. For a 12-inch rough-in, the distance should be between 115 and 125 inches.

It is possible to install a toilet in a bathroom space that has a different rough-in than what the toilet is designed for. However, it is ideal to match the rough-in for your bathroom plumbing.

How do you tell if a toilet is a 10 inch rough

When measuring for a new toilet, be sure to get the rough-in measurement. This is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.

See also  3d printed toilet paper holder?

A 12-inch rough-in for a toilet means that the center of the toilet flange is 12-inches away from the finished back wall. This information can be found on the toilet’s specification sheet.

How far from wall should toilet rough in Be?

The standard distance from the back wall for a toilet flange is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. This is to allow for the 1/2 inch thickness of the drywall.

Elongated bowls are generally considered more hygienic because the larger surface area of the bowl makes it easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

What is the rough-in for an elongated toilet?

There are two main types of toilets- elongated and round. Elongated toilets are longer than round toilets and usually fit a 10” rough-in, while round toilets usually fit a 14” rough-in.

When planning to install a new toilet, be sure to measure the rough-in size to ensure it will fit your space. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.

How do you know if your toilet is tight enough

It is important to tighten the bolts on your toilet bowl carefully. As a rule of thumb, try a turn or two a side until you feel resistance. Then, try to wiggle the toilet bowl slightly. If there is no significant movement, you are probably tight enough. This tightening operation is a “feel” thing you get from experience, so be conservative and use your best judgement.

See also  Diy composting toilet kit?

The center of the water closet flange should be 12-inches from the back wall. When you measure this distance, make sure you measure from the finished wall and not the base molding. Another thing you need to consider is the thickness of your back wall. If you used ½” drywall, add an extra ½”.

Should toilet flange be flush with floor?

If you install the toilet flange flush with the finished floor, or even below the finished floor, leak paths will form, because the flange won’t be at the correct height to accept the horn at the bottom of the toilet. A best practice is to install the toilet flange on top of the finished floor. This will ensure that the flange is at the correct height and will create a proper seal.

The standard toilet rough-in size is 12 inches. However, some older homes come with 10-inch or 14-inch rough-in sizes. You may also find 10-inch rough-in sizes in powder rooms, half baths, or other small bathrooms to save space.

What is code for distance in front of toilet

Bathroom building code typically requires that toilets have at least 21 inches of clearance in front of them. However, it is not required, and opting for 30 inches of room provides a more comfortable space. Side-to-side clearance: a minimum of 15 inches from the center-line of the toilet to the nearest obstruction is typically required.

In general, the maximum distance of the toilet from the main drain should not exceed 4 meters, with a 2% minimum slope. Within these limits, the plumbing system can guarantee an effective draining, avoiding bad smells and the problem of emptying the siphons.

What is more popular elongated or round toilet?

There are a few things to keep in mind when deciding between an elongated and a round toilet. First, elongated toilets are longer and may be more comfortable for some people. They are also more common in new construction. Round toilets might fit better in smaller bathrooms to maximize the space. They may also be slightly less expensive than elongated toilets. Ultimately, the decision comes down to personal preference and what will work best for your bathroom.

See also  Toilet water is yellow?

If you or a loved one struggles to get on or off a standard toilet, a tall toilet may be a great option. Taller toilets require less effort to use, which can be a huge relief for seniors with leg, hip, knee, joint, or back problems. Additionally, taller toilets are more comfortable for taller people who find standard toilets to be too low.

Which is better one piece or two piece toilet

If you’re looking for a more durable toilet option, a one-piece toilet is a good choice. These toilets are typically made of one solid piece of ceramic, which makes them less likely to break or leak than a two-piece toilet. They’re also a good option if you have a small bathroom, as they take up less space.

When measuring the bowl shape of a toilet, it is important to measure from the back of the toilet to the end of the bowl, parallel to the floor. This will give you the most accurate measurement of the bowl shape.

Are there different sizes of elongated toilets

The standard elongated bowl measures 18-1/2 inches from the bolts to the front. The most common elongated configurations come in chair height, which is about 16-1/2 inches tall. Then there are ADA options which are as tall as 17-1/2 inches.

If you need to move your toilet more than just a couple of inches, you’ll need to do some serious demolition to access and relocate water and waste lines. Then you’ll need to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures. It’s a lot of work, but if you’re up for the challenge, you can definitely do it yourself. Good luck!


The size of a toilet rough in is the distance from the back wall to the center of the drain. The most common rough in sizes are 12 inches and 10 inches.

There are a few different toilet rough in sizes, but the most common is 12 inches. This is the distance from the back wall to the center of the drain. The other common sizes are 10 and 14 inches. Toilet rough in sizes can vary depending on the manufacturer, but these are the most common sizes.