The average person uses the toilet several times a day, making it one of the most important fixtures in the home. But when the toilet tank is too close to the wall, it can be a real nuisance. Not only is it difficult to access the tank, but it also makes it difficult to clean. When the toilet tank is too close to the wall, it’s important to take action to remedy the situation.
If your toilet tank is too close to the wall, you may need to adjust the position of the tank by loosening the bolts that hold it in place. Once the tank is loose, you can slide it over to the desired position and retighten the bolts.
Table of Contents
How far should toilet tank sit from wall?
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. The minimum distance in front of the toilet to the facing wall or fixture is 21 inches.
There is no definitive answer as to whether a toilet should touch the wall or not – it is simply a matter of personal preference. Some people are okay with a toilet tank’s top touching the back wall, while others prefer to have a minimum of one inch of space between the commode and the back wall. Ultimately, it is up to the individual to decide what feels most comfortable for them.
How do you move a toilet further from the wall
If you need to move your toilet more than a couple of inches, you will need to demolish the concrete to access and relocate water and waste lines. Then you will need to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures. This is a big job, so be sure to hire a professional if you’re not confident in your own abilities.
When measuring the distance from the center of the water closet flange to the back wall, be sure to measure from the finished wall and not the base molding. If the back wall is made of ½” drywall, add an extra ½” to the measurement.
Why are toilets against the wall?
Wall-hung toilets are a great option for small bathrooms or bathrooms with limited space. They are also easy to clean and have a modern look. However, they are more expensive than traditional toilets and require special installation.
Most toilets have a space between the bottom of the tank and the top of the bowl. This space is called the “gap.” The gap allows water to seep into the bowl, which keeps the bowl full. The gap also allows air to enter the bowl, which prevents the bowl from overflowing.
Toilet tanks have a rubber washer that forms a seal between the tank and the bowl. The washer is held in place by a nut. The nut can be tightened or loosened to adjust the size of the gap.
If the nut is tightened too loosely, the tank will leak water underneath the washer and down the bolts. If the nut is tightened too much, the tank may crack.
The best way to adjust the gap is to trial and error. Start by tightening the nut until the tank just starts to leak, then loosen it until the leak stops.
Can I move toilet closer to the wall?
If you need to move your toilet, you can do so without having to make a new hole in the floor. An offset toilet flange will allow you to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line, saving you money.
If you’re planning on moving your toilet, it’s important to involve the professionals to ensure everything is done correctly. Once the toilet is removed, your plumber will need to move the drainage and water supply to accommodate the new location. This is not a simple weekend DIY job, but with the help of a professional, it can be done.
How difficult is it to change the location of a toilet
If you are planning on moving your toilet, you will need to hire both an experienced plumber and a bathroom design professional. The main issues with moving the toilet involve plumbing problems, such as changes to the drainage, venting, and water supply. You will also likely need to open up some spaces, such as the floor or the wall.
If you install the toilet flange on top of the finished floor, you can avoid leak paths forming. This is because the flange will be at the correct height to accept the horn at the bottom of the toilet, and there will be no gaps for leaks to form.
How do I know if my toilet is a 10 or 12 rough?
The rough-in for a toilet is the distance from the center of the drain to the wall. Most toilets have a 12-inch rough-in, which means that the drain is 12 inches from the wall. Toilets with a 10-inch rough-in are also common. If you have a smaller space, you may have a 9-inch or even an 8-inch rough-in. Toilets with a 14-inch rough-in are less common, but they do exist.
The rough-in measurement for a toilet is the distance from the wall to the center of the drainpipe. Most toilets have a rough-in of 12 inches, but toilets with a 10- or 14-inch rough-in are less common. If you have a toilet with a 10- or 14-inch rough-in, you may have fewer options when it comes to choosing a replacement toilet.
What are the disadvantages of wall mounted toilet
A wall-mounted toilet can be a great addition to your bathroom, but it is important to keep in mind the increased cost and effort required for installation. Many times, the tank and wall mounting assembly are sold separately from the actual toilet, so be sure to factor that into your budget. Also, keep in mind that a wall-mounted toilet will usually require more effort to install than a floor-mounted toilet.
Privacy is not as big of a concern in the United States as it is in other parts of the world. Toilets are typically used for hygiene purposes and not for privacy purposes. In addition, American toilets are typically made out of porcelain, which is easy to clean.
What do you do with the space behind the toilet?
There are many ways that you can fill the empty space behind your toilet. Some options include hanging towels, installing hooks for baskets, mounting an open shelf, or mounting multiple shelves. You could also mount baskets or a storage unit, or create built-in shelving. Another option is to add a storage tower. Whatever option you choose, make sure that it is sturdy and securely attached to the wall so that it does not pose a safety hazard.
When installing a toilet, you must adhere to certain clearance requirements in order to meet code. Your toilet must be at least 15 inches from any side wall or partition, and no closer than 30 inches center to center from an adjacent fixture. Additionally, there must be a clearance of at least 21 inches from a wall, fixture or door. By adhering to these requirements, you can ensure that your installation will be up to code.
What is the minimum distance that a water closet toilet from the the side wall is allowed measured from the centerline of the water closet
According to figure 30, toilet stalls must have a water closet located along the back wall, and the centerline of the water closet must be 18 inches (455 mm) from the side wall, in order to provide a space for a side or forward approach and to accommodate a side grab bar.
This job is not easy, but many homeowners can do it with the right preparation. It will require a lot of remodeling, including tearing down walls and bringing up sections of the floor and fixtures. With the right planning, though, this job can be completed successfully.
Is it expensive to move a toilet
Whether you are planning a small bathroom upgrade or a complete overhaul, it is important to factor in the cost of plumbing when estimating your budget. Moving fixtures such as toilets and sinks can be expensive, ranging from $2,500 to $3,500 per fixture. Additionally, connecting the toilet to the existing sewer line can be challenging for your plumber, which may add to the overall cost of the project. By taking these factors into account from the start, you can ensure that your bathroom remodel stays on budget.
If you think you may have a leak in your toilet, it’s important to call a plumber to take a look. Reseating a toilet is a relatively simple fix that a plumber can do, but it will likely cost between $50 and $200 per hour. Make sure to ask about other potential problems that could be causing the leak so that you can get them fixed as well.
Conclusion
The toilet tank should not be too close to the wall. It should be at least six inches away from the wall so that you can easily access the back of the tank and the valve.
The moral of this story is to measure twice and cut once. Fortunately, there are a few different ways to fix this problem. One is to simply move the toilet tank away from the wall. Another is to install a tankless toilet.