If you’ve ever felt like you’re going to miss the toilet when you sit down, or that you’re going to hit your knees on the wall, you’re not alone. Many people find that the toilet is too close to the wall, making it difficult to use. While this may not be a problem for everyone, it can be a major issue for those who have a hard time reaching the toilet or who have a disability that makes it difficult to use the toilet. There are a few ways to solve this problem, including moving the toilet away from the wall, using a raised toilet seat, or using a different type of toilet.
The answer to this depends on personal preference. Some people may feel that the toilet is too close to the wall if it is less than a foot away, while others may be fine with it being right up against the wall. If you are not comfortable with the toilet being close to the wall, you can always ask your landlord or builder to move it further away.
Table of Contents
How close can a toilet be to a wall?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. There should be at least 24 inches of clear space in front of a toilet or bidet.
If you need to move your toilet more than a couple of inches, you’ll need to demolish the concrete to access and relocate water and waste lines. Then you’ll need to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.
Is a toilet supposed to touch the wall
There is no hard-fast rule about whether a toilet should touch the wall, as it is a matter of personal preference. Some people are okay with a toilet tank’s top touching the back wall, while others desire a minimum of one inch of space between the commode and the back wall. Ultimately, it is up to the individual to decide what is most comfortable for them.
If you need to move your toilet, you can do so without having to make a new hole in the floor. An offset toilet flange will allow you to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
Can a toilet be more than 12 inches from the wall?
This measurement is important to ensure that there is enough space around the toilet for comfortable use. Make sure that there are at least 15 inches of clearance from the center of the toilet to any adjacent fixture or wall.
If you’re looking to move your toilet, you’ll need to hire both a experienced plumber and a bathroom design professional. This is because there are a number of potential plumbing issues that can arise, such as changes to the drainage, venting, and water supply. You may also need to open up some spaces in your bathroom, such as the floor or the wall, in order to accommodate the new location of the toilet.
Is it possible to reposition a toilet?
If you are planning on moving your toilet, it is important to involve the professionals to ensure the job is done properly. Once the toilet itself is removed, your plumber will have to move the drainage, as well as the water supply to accommodate the new location. This is not a job that can be done over a weekend and DIY, so involving the professionals from the start is the best way to ensure it is done right.
Wall-hung toilets are becoming more popular because they save space, are easier to clean, and have a modern look. They tend to be more expensive than other options, but their installation does not require cutting into the floor to accommodate the drain. For renovation projects, drains can be installed within the wall instead.
How far from the wall should a toilet flange be
The distance from the toilet flange to any sidewall or nearby fixture must be at least 15″. However, 15″ is the absolute minimum. A 15-inch distance from the vanity, shower, tub and back and side walls is required to accommodate the toilet flange.
There are many ways to fill the empty space behind the toilet. Some options include hanging towels, installing hooks for baskets, mounting an open shelf, mounting multiple shelves, mounting baskets, mounting a storage unit, creating built-in shelving, or adding a storage tower. Choose the option that best fits your needs and style.
How easy is it to reposition a toilet?
Remodelling a home to make it more handicap accessible is a big job, but it’s definitely doable for many homeowners. There will be a lot of work involved, including tearing down walls, bringing up sections of the floor, and installing new fixtures. But the finished product will be worth it, and it will make your home much more comfortable and convenient for those with disabilities.
The cost to move a toilet or sinks can be significant, especially if you have multiple fixtures. Plumbing is also a significant cost factor if you’re altering your bathroom floor plan. The toilet is often the most expensive to move, so be prepared for that. Additionally, connecting the toilet to the existing sewer line can be a bit tricky for your plumber.
How do you slightly move a toilet
Moving a toilet may seem like a daunting task, but with a little planning and careful execution it can be done relatively easily. Here are 8 simple steps to follow when moving a toilet:
1. Make a plan: Decide where you want the toilet to be located and make sure you have enough space to accommodate it.
2. Make space for the toilet: Clear out any obstacles in the way of where the toilet will be located.
3. Turn off the water: This is an important step to prevent any water damage.
4. Remove remaining water: Use a plunger or other tool to remove any water remaining in the toilet bowl.
5. Disconnect the supply line from the toilet: This step will ensure that there is no leaks when you move the toilet.
6. Remove the bolts: Unscrew and remove the bolts that are holding the toilet to the floor.
7. Remove and move the tank: Carefully lift the tank and set it aside in its new location.
8. Remove and move the toilet bowl: Flip the toilet bowl upside down and carry it to its new location.
Once you have moved the toilet to its new location, you will need to
If you’re measuring the distance from the center of the bolts on the bottom of the toilet to the wall, and you get a measurement of between 115 and 125 inches, then your rough-in is 12 inches. This is just a guideline, but it should give you a good idea of how big your rough-in should be.
What does 12-inch rough in mean when installing a toilet?
The toilet’s rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases. This measurement is important when installing a toilet, as the waste pipe must be properly positioned in order for the toilet to function properly.
The standard offset for most residential toilets is 12-inches. This measurement is taken from the center of the drain to the center of the supply line. This offset is important to know when installations or repairs are needed.
Do I need consent to move a toilet
If you are unsure if you need a building consent, please contact your local council.
You will need to get planning permission if you want to make any changes to a listed building. Building regulations are only likely to apply if you are adding a new bathroom.
How far can a toilet be from the main drain
The main drain is the toilet’s primary connection to the sewage system, and it’s important to keep this distance as short as possible to avoid bad smells and the problem of emptying the siphons. In general, the maximum distance of the toilet from the main drain should not exceed 4 meters, with a 2% minimum slope. Within these limits, the plumbing system can guarantee an effective draining.
It can cost between $50 and $200 to have a plumber reseat a toilet. Sometimes, the cause of a leak is due to a wearing out of the wax ring at the base of the toilet.
Warp Up
There isn’t a definitive answer to this question since it depends on the specific dimensions of the bathroom and the toilet. However, generally speaking, it is best to have at least a few inches of space between the toilet and the wall to ensure that it is comfortable to use and that there is adequate ventilation.
The toilet being too close to the wall is a bit of a nuisance. It makes it difficult to stand up and use the toilet without banging into the wall. Additionally, it can be difficult to keep the area around the toilet clean when it is so close to the wall.