The proximity of toilets to walls is a controversial topic. Some believe that the close proximity is unsanitary and promotes the spread of disease. Others believe that it is more efficient and economical to have toilets close to walls.
There is no definitive answer to this question as it depends on personal preference. Some people may feel that a toilet that is too close to the wall is uncomfortable, while others may not mind it. Ultimately, it is up to the individual to decide what is best for them.
Table of Contents
How close can a toilet be to a wall?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. There should be at least 24 inches of clear space in front of a toilet or bidet.
If you need to move your toilet more than a couple of inches, you will need to demolish the concrete to access and relocate water and waste lines. Then you will need to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.
Is a toilet supposed to touch the wall
This is a matter of personal preference, so there is no hard and fast rule. Some people are okay with a toilet tank’s top touching the back wall, while others desire a minimum of one inch of space between the commode and the back wall.
If you need to move your toilet, you can do so without having to make a new hole in the floor. An offset toilet flange will allow you to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line, which will save you money.
Can a toilet be more than 12 inches from the wall?
The minimum clearance from the center of the toilet to any adjacent fixture or sidewall is 15 inches. Make sure there are at least 15 inches of clearance from the center of the toilet to any adjacent fixture (or wall).
If you’re planning on moving your toilet, you’ll need to hire both an experienced plumber and a bathroom design professional. This is because there are a number of potential plumbing issues that can occur, such as changes to the drainage, venting, and water supply. You may also need to open up some spaces, such as the floor or the wall.
Is it possible to reposition a toilet?
If you’re planning on moving your toilet, it’s important to involve professional help. Your plumber will need to move the drainage and water supply to fit the new location, and this isn’t a straightforward weekend DIY job. But with professional help, you can get it done!
As per the requirements, any sidewall or nearby fixture must be at least 15″ away from the toilet’s flange. However, 15″ is the absolute minimum and a 15-inch distance from the vanity, shower, tub and back and side walls are required to accommodate the toilet flange.
What can I do with space behind my toilet
There are a few different ways that you can fill the empty space behind the toilet. You can hang towels, install hooks for baskets, or mount an open shelf. If you have more space, you can also mount multiple shelves or a storage unit. You can also create built-in shelving or add a storage tower.
Although this job is not easy, many homeowners may be able to do it with some remodelling. It may require tearing down walls, raising sections of the floor, and changing fixtures.
Is it expensive to move a toilet?
If you are considering moving your toilet or sinks as part of a bathroom remodel, be aware that the cost can be quite high – up to $3,500 per fixture. Plumbing is often a significant cost factor when altering a bathroom floor plan, and the toilet is usually the most expensive to move. Connecting the toilet to the existing sewer line can also be tricky for your plumber, so be sure to discuss all the details with your contractor before making any final decisions.
Toilet flanges should be a minimum of 15″ from any sidewall or nearby fixture. This is to ensure that the toilet can be properly installed and function correctly. If the flange is too close to a sidewall or fixture, it may be difficult to install the toilet or use it properly.
Do I need consent to move a toilet
If you’re planning on making any changes to your bathroom, it’s always a good idea to check whether or not you need a building consent first. In most cases, you’re unlikely to need one for simply re-positioning or replacing sanitary fixtures like a bath, bidet, wash hand basin or toilet pan. However, if you’re planning on moving a toilet pan from a toilet compartment into an adjacent bathroom, you may need a building consent.
If you are planning on refitting a kitchen in your home, you will not need planning permission unless the building is listed. However, you may need to comply with Building Regulations if you are adding a new bathroom.
How far can a toilet be from the main drain?
The main drain is the main pipe that carries wastewater from the home to the sewer or septic system. The maximum distance that the toilet can be from the main drain is 4 meters. This is to ensure that the wastewater can flow effectively from the home and avoid any bad smells.
If your toilet is leaking, it may be due to a worn out wax ring at the base of the fixture. A plumber typically charges between $50 and $200 per hour to reseat a toilet, in addition to any other necessary repairs.
How do you slightly move a toilet
There are a few things you need to do before moving a toilet: make a plan, clear out a path for the toilet, and turn off the water. Then, you can remove the bolts and disconnect the supply line before moving the tank and bowl. Finally, clean and plug the drain hole.
Relocating plumbing can be a time consuming and hard work. But take comfort in the fact that once it’s done, you won’t have to think about it for a long time.
Should toilet flange sit flush with floor
If you install the toilet flange on top of the finished floor, there will be no leak paths, because the flange will be at the correct height to accept the horn at the bottom of the toilet.
Toilet rough-ins are determined by measuring from the center of the drain to the wall. A 12-inch rough-in means that the drain is 12 inches from the wall. Most toilets require a rough-in of at least 10 inches, but some may need a rough-in of up to 14 inches. Toilets with a 12-inch rough-in are generally more comfortable to use, as they provide more space for your legs.
Warp Up
The toilet is too close to the wall for comfort.
The conclusion of this topic is that the toilet should not be too close to the wall. This is because it can be difficult to clean the toilet if it is too close to the wall, and it can also be difficult to use the toilet if it is too close to the wall.