Skip to content

Toto toilet seats replacement?

If your Toto toilet seat is worn out or damaged, you may be considering replacing it. There are a few things to keep in mind when shopping for a replacement seat. First, make sure to measure your toilet bowl to determine the correct size seat. Second, decide what type of seat you prefer. Toto offers a variety of toilet seats including standard, soft-close, and bidet seats. Third, choose a seat that matches the finish of your toilet for a cohesive look. fourth, be sure to read the reviews before making your purchase. Once you’ve found the perfect replacement seat, follow the instructions included with your purchase for easy installation.

Toto toilet seats can be replaced by following these steps:

1. Remove the old seat by unscrewing the bolts that hold it in place.

2. Clean the surface of the toilet where the seat will be mounted.

3. Place the new seat on the toilet and screw it in place.

4. Tighten the bolts until the seat is secure.

How do I know which Toto toilet seat I need?

Part numbers that are printed on the label attached to the underside of the tank lid are the manufacturing part numbers for the tank. They are used to identify the tank for manufacturing and quality control purposes. The part numbers are also used to order replacement parts for the tank.

If you are looking for a new toilet seat, we have a wide selection of colors and styles to choose from. Simply select the style and color you like, and a brand new seat will be on its way to you!

See also  Standard toilet rough in measurements?

Will a regular toilet seat fit a Toto toilet

I’ve had good luck with American Standard seats in the past – they tend to fit well and the white is a good match for Toto’s Colonial White. I don’t think you’ll have any trouble finding elongated seats that fit, but if you’re looking for a perfect color match, you might want to try a different brand.

The TOTO Washlet is a great product that will fit any standard elongated toilet. I personally put mine on a TOTO Entrada 2-piece 128 GPF Single Flush Elongated Toilet because I was installing both at the same time. I have other Kohler elongated toilets and they are the same size as the TOTO. You will enjoy the quality of the TOTO Washlet.

How do I know if my toilet is 2 or 3 inches?

If your flush valve drain opening is the size of a baseball or orange, you need a 2″ flapper. If the opening is the size of a softball or grapefruit, you need a 3″ flapper.

This warranty is valid only to the original purchaser/owner of the Product and is not transferable to subsequent owners.

Can I replace just my toilet seat?

If you need to replace your toilet seat for any reason, it’s important to choose the right one. There are many factors to consider, such as size, shape, material, and design. You’ll also want to make sure it’s compatible with your toilet. Once you’ve found the perfect seat, installation is easy.

When you are looking to purchase a new toilet seat, it is important to measure the size of the bowl. This can be easily done by finding the bolts where the seat attaches to the bowl and measuring the distance between them. The standard measurement is 5 1/2 inches. You should also measure the width of the bowl at its widest point.

See also  Leaky toilet tank bolts?

Do replacement toilet seats fit all toilets

There are a range of different toilet seat fittings. Some are bottom fixing (fitted from beneath the fixing holes) and some are top fixing (usually required when there isn’t access to the bottom of the pan, eg with a fully shrouded toilet).

When attempting to remove a screw that is covered by a screw cap, it can be difficult to get a grip on the screw head. The best way to remove the screw cap is to first insert the head of a screwdriver under the top of the screw cap. This will pop the cover off of the screw head. Then, use the screwdriver to remove the screw.

What is the difference between a standard and elongated toilet seat?

This note is to inform you about the difference between a round front bowl and an elongated bowl. A round front bowl has a dimension of approximately 165″ from the seat bolt holes to the tip of the bowl. An elongated bowl is approximately 2″ longer, or about 185″. Thanks for reading!

There are a few things to keep in mind when it comes to toilet seat dimensions. The typical width is between 14 and 14-1/2 inches. The typical round length is between 16 and 17 inches. And the typical elongated/extended length is between 18 and 19 inches. Keep these numbers in mind when shopping for a toilet seat so that you can get the one that will best fit your needs.

What toilet seat will fit my toilet

Toilet seats come in standard sizes, but measuring your seat before buying a replacement is still wise. Start by measuring the seat from back to front. Buy a standard round seat if the length is around 16 in (41 cm). If it’s around 18 in (46 cm) long, go with an elongated seat.

See also  What is the purpose of a pea trap?

If you are looking to replace your toilet seat, it is important to know the different types of seats that are available. In general, an elongated seat will fit elongated toilets, and round-front seats will fit round bowl toilets. However, you should measure the current seat from the hinge bolt to the front of the seat to ensure your chosen seat will fit your toilet.

How many inches is a comfort height toilet?

Comfort height toilets are a great option for anyone who needs a taller toilet, such as those with disabilities or mobility issues. These toilets are typically 17 to 19 inches tall from floor to seat, which is the height required by the Americans with Disabilities Act (ADA). Comfort height toilets can make it easier for those with mobility issues to use the restroom, and they can also be more comfortable for taller people. If you’re considering a comfort height toilet, be sure to measure your bathroom to make sure it will fit.

A majority of toilets will use the two inch flapper; however three inch flappers have become popular in recent years and can be found in newer toilets manufactured since 2005. An easy reference for determining your toilet’s flapper size is to look at the flush valve drain opening at the bottom of your tank. If the opening is two inches wide, then you will need a two inch flapper. If the opening is three inches wide, then you will need a three inch flapper.

Final Words

There are a few different ways to replace a Toto toilet seat. Depending on the model of toilet, you may be able to use a universal seat that will fit most models. If you have a specialized or older model toilet, you may need to order a replacement seat specifically for your toilet. To install the new seat, you will need to remove the old seat and then use the bolts that come with the new seat to secure it in place.

After comparing several different brands of toilet seats, we have decided that the Toto toilet seat is the best replacement seat on the market. It is durable, easy to clean, and fits a variety of toilet models. We would recommend the Toto toilet seat to anyone looking for a new seat.