The term “12-inch rough-in” refers to the distance from the wall behind the toilet to the centerline of the closet bolts. Most toilets have a rough-in of 12-inches. Toilets with a 10 or 14-inch rough-in are also available, but these are less common. The measurement is important because it determines the type of toilet you can install. A 12-inch rough-in toilet will not fit into a space designed for a 10 or 14-inch rough-in.
A 12 inch rough in toilet is a toilet that has a rough in measurement of 12 inches. This means that the distance from the back of the toilet to the wall is 12 inches. Most toilets have a rough in measurement of 12 inches, but some may have a different measurement.
Table of Contents
How do I know if my toilet is a 10 or 12 rough?
If you’re measuring the distance from the center of the capped bolts on the bottom of the toilet to the wall, and you get a measurement of between 115 and 125 inches, then you have a 12-inch rough-in. This means that the distance from the wall to the center of the drain pipe should be 12 inches.
If you’re looking to install a toilet in a bathroom with a 10″ rough-in, you’ll need to find a toilet specifically designed for that size. A 12″ rough-in toilet will not fit in a 10″ rough-in, so make sure to double check the size before making your purchase.
How do you measure rough in toilet
In order to take a toilet rough-in measurement, you will want to measure the distance from the wall to the bolt caps at the center of the discharge. The general rule of thumb for clearance from the wall that faces the bowl is 24″ and just about 15″ on each side.
The rough-in size is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to measure this before you remove the old toilet. The standards for toilet rough-in sizes are as follows:
-12 inches for a standard toilet
-10 inches for a compact toilet
-14 inches for an oversized toilet
Are most toilets 12 inches from wall?
Most toilets will have a 12 inch rough-in. Toilets with a 10- or 14-inch rough-in measurement are a little less common, so you might have less of a selection of toilets of this size. If you’re looking for a toilet with a 10- or 14-inch rough-in, be sure to measure your space carefully to ensure that you’ll be able to find a model that will fit.
When installing a water closet, you’ll want to set the center of the flange 12inches from the finished back wall. Don’t measure from the base molding! Take this measurement from the finished wall. This will ensure that your water closet is properly installed.
Does rough-in have to be exact?
To measure a toilet’s rough-in distance, simply measure the distance from the center of the drainpipe to the nearest wall. Most toilets have a standard rough-in distance of 12 inches, but it’s always best to double check before making your purchase.
When you are looking at the flush valve drain opening at the bottom of your tank, you will need to determine the size of the flapper that you need. If the opening looks about the size of a baseball or orange, you will need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you will need a 3″ flapper.
How far from wall should toilet rough-in Be
The standard distance from the back wall for a toilet flange is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. This ensures that the flange is set at the proper distance from the wall framing, so that the finished drywall will be the correct thickness.
The standard rough-in dimensions for toilets is 12-inches. A distance of 10-inches or 14-inches is occasionally found in small bathrooms or older homes. Determine your bathroom’s rough-in by measuring from the wall behind the toilet to the middle of the bolts on the base of the toilet.
What is the difference between S & P trap toilets?
An S-trap is an S-shaped trap between the toilet outlet and the sewer system. It is connected to the drainpipe through the floor. On the other hand, a P-trap is shaped like the letter P and is connected to the drainage system through an opening in the wall.
It is important to install the toilet flange at the correct height to avoid leaks. If the flange is installed too low, leak paths will form between the flange and the toilet horn.
How many inches do you need on either side of a toilet
Most bathroom codes require a minimum of 15 inches from any side wall or obstruction for a toilet or bidet. The center of the fixture should be at least 30 inches away from any other fixture. The NKBA recommends 32 inches.
The size of a toilet’s flapper is important in determining how well the toilet will flush. A majority of toilets will use the two inch flapper; however, three inch flappers have become popular in recent years and can be found in newer toilets manufactured since 2005. An easy reference for determining your toilet’s flapper size is to look at the flush valve drain opening at the bottom of your tank.
What is the difference between a 10 inch and a 12 inch toilet?
The rough in for a toilet is the distance from the back wall to the center of the closet flange. A standard rough in is 10 or 12 inches. however, some toilets require a specific rough in. For example, a 10 inch rough in toilet is slimmer to allow for the decreased distance.
When installing a toilet, it is important to make sure that there is enough space around the flange. The flange must be at least 15″ away from any sidewall or nearby fixture. However, 15″ is the absolute minimum. A 15-inch distance from the vanity, shower, tub and back and side walls are required to accommodate the toilet flange.
Warp Up
A 12-inch rough in toilet is a toilet that has a 12-inch distance from the center of the drain hole to the wall behind the toilet. This is the standard size for toilets, but some toilets may have a 10-inch or 14-inch rough in.
A 12-inch rough in toilet means that the hole in the ground that the toilet sits in is 12 inches from the perpendicular wall behind it. This is a standard size for many toilets, so many houses are built with this in mind. However, if you have a smaller bathroom, you may want to look for a 10-inch or 14-inch rough in toilet.