When you are shopping for a new toilet, you may come across the term “rough in size”. This refers to the distance from the back wall to the center of the drain pipe. The standard rough in size for toilets is 12 inches, but there are also 10 and 14 inch options available. This is an important measurement to take into consideration when purchasing a new toilet, as you need to make sure that the rough in size of the toilet you select will fit in the space you have available.
Rough in size is the measurement from the wall to the center of the drainpipe.
Table of Contents
Can you replace a 10 inch rough in toilet with a 12-inch rough in toilet?
If your bathroom’s plumbing rough-in is 10 inches, you should try to find a toilet with a 10-inch rough-in. However, if your only option is a toilet with a 12-inch rough-in, you can still install it. You may need to make some adjustments to your bathroom’s plumbing, but it is possible to install a toilet with a different rough-in than your bathroom’s plumbing.
The old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard) There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline If your measurements are between 115 and 125 inches, it is a 12-inch rough-in.
Does toilet rough in size matter
When measuring for a new toilet, you will want to start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It is best to perform this measurement before you remove the old toilet. Once you have the rough-in size, you can then start shopping for toilets that will fit your space.
The rough in dimensions for a toilet refer to the space between the wall behind the toilet and the center of the waste pipe. Standard rough in dimensions for a toilet are 12 inches, but in some cases they can be anywhere from 10 to 14 inches.
What is a comfort height toilet?
If you’re looking for a more comfortable toilet, you may want to consider a comfort height model. These toilets tend to be between 17 and 19 inches from the ground, which is taller than a standard traditional model. This can make it easier to use the toilet, especially if you have any mobility issues.
To measure a toilet’s rough-in distance, simply measure the distance from the wall to the center of the drain. This measurement is critical when purchasing a new toilet, as you need to make sure that the new fixture will fit in the space available. With an accurate measurement, you can avoid buying the wrong toilet for your bathroom.
How do I know if my toilet is 2 or 3 inches?
If you’re not sure what size flapper you need, you can always take a look at the flush valve drain opening at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
If you are looking at the toilet, make sure there is at least 15 inches of clearance from the center of the toilet to any adjacent fixture (or wall). The item thicknesses can include drywall (1/2″), mosaic tile (3/8″), and mortar (1/8″). The total thickness should be 1″.
Why would I want an elongated toilet bowl
Elongated bowls are often considered more ‘hygienic’ due to their larger surface area. This makes them easier to use with less mess, especially for men and children. longer/wider bowls are also generally easier to use for those with mobility issues.
If you are over 6 feet tall, or have mobility issues, it is best to use a toilet that is taller than 19 inches. Extra tall versions are typically 20 to 21 inches from floor to bowl yet are compact enough to fit in the standard private bathroom.
How do you know if your toilet is tight enough?
As a rule of thumb, try to turn the toilet bowl a couple of times until you feel resistance. If there is no movement, you are probably tight enough. This is a “feel” thing that you get from experience, so be conservative and use your best judgement.
To find a top performer, shop at home centers like the Home Depot toilets section with these features in mind. Tip 1: Compare flush ratings online. Tip 2: Check for rebates on high-efficiency models. Tip 3: Get a pressure-assist toilet if a clean bowl using less water is a top priority.
How far from wall should toilet rough in Be
The standard distance from the back wall for a toilet flange is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Plumbers should set the toilet flange at least 15-1/2 inches from the center of the flange to the wall framing when using standard drywall, which is 1/2 inch thick.
This note is to remind you that the minimum distance from the toilet flange to any sidewall or nearby fixture is 15 inches. You can add more space if you want, but 15 inches is the very minimum. This means the toilet flange should be at least 15 inches from the vanity, the shower, the tub, and both the back and side walls.
Is standard or chair height toilet better?
A comfort toilet is typically taller than a standard toilet, making it more comfortable for taller people to use. It is also preferred by the elderly and those with physical disabilities, as the extra height makes it easier to get on and off the toilet.
There are a few factors to consider when purchasing an extra tall toilet for an elderly user. The height of the toilet is important, as is the type of toilet. A standard toilet may be too low for an elderly user, so an extra tall toilet may be necessary. Another consideration is the type of flushing mechanism. A standard flushing toilet may be too difficult for an elderly user to operate, so a dual flush toilet may be a better option.
Conclusion
Toilet rough in size is the measurement from the back wall of the toilet to the center of the drain pipe. The standard size is 12 inches, but some toilets may be available in a 10 or 14 inch size.
The rough in size of a toilet is the distance from the back of the bowl to the wall. This is important to know when installing a toilet, as you need to make sure that the flange is properly aligned with the drainage pipe.